Installing LCNC on Beelink  BT3 PRO II

More
5 years 4 months ago #211392 by htdave
Replied by htdave on topic Installing LCNC on Beelink  BT3 PRO II

Turn off any power saving and you may also use the isolcpu kernel commandline option.


Is there a guide to using isolcpu? I'm a complete newbie to linux

What is an acceptable max jitter for Mesa Ethernet?

Will work through the wifi over the next few weeks as time permits.

Thanks again for all the help

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
5 years 4 months ago #211395 by BeagleBrainz
Replied by BeagleBrainz on topic Installing LCNC on Beelink  BT3 PRO II
The search function should turn up numerous hits for isolcpu or it maybe isolcpus.

If you weren’t so north of my location I’d offer my time for nix to help ya out.

Please Log in to join the conversation.

More
5 years 4 months ago #211397 by htdave
Replied by htdave on topic Installing LCNC on Beelink  BT3 PRO II

If you weren’t so north of my location I’d offer my time for nix to help ya out.


Maybe I'm better off sending it down to you and getting you to set it all up correctly - I'm happy to pay for your time

Please Log in to join the conversation.

More
5 years 4 months ago #211398 by tommylight
Replied by tommylight on topic Installing LCNC on Beelink  BT3 PRO II

htdave wrote: What is an acceptable max jitter for Mesa Ethernet?

126uS for sure is OK (126000 nS), as i have an old laptop that does that and works for days without dropping the link.

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
5 years 4 months ago #211415 by BeagleBrainz
Replied by BeagleBrainz on topic Installing LCNC on Beelink  BT3 PRO II

htdave wrote:

If you weren’t so north of my location I’d offer my time for nix to help ya out.


Maybe I'm better off sending it down to you and getting you to set it all up correctly - I'm happy to pay for your time


Don't worry about paying for my time, I've got plenty of that at the moment.

I'll give you my postcode, 2168, just so you can get a quote for postage there and back and we'll go from there.

Please Log in to join the conversation.

More
5 years 4 months ago #211482 by htdave
Replied by htdave on topic Installing LCNC on Beelink  BT3 PRO II

I'll give you my postcode, 2168, just so you can get a quote for postage there and back and we'll go from there.


Thanks for that. I've just ordered a usb wifi, so once that turns up, I'll see how everything is going, and if I am still having no luck, I'll ship it down to you.

Thanks again for all the help :)

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
5 years 4 months ago #211486 by BeagleBrainz
Replied by BeagleBrainz on topic Installing LCNC on Beelink  BT3 PRO II
Could you just try something ?
Code:
tar -cvzf efivars.tar.gz /sys/firmware/efi/efivars/
&
Code:
dmesg | grep bcrm > dmesg.txt
And post both files.

Please Log in to join the conversation.

More
5 years 4 months ago #211669 by htdave
Replied by htdave on topic Installing LCNC on Beelink  BT3 PRO II
Code:
~$ tar -cvzf efivars.tar.gz /sys/firmware/efi/efivars/ tar: Removing leading `/' from member names /sys/firmware/efi/efivars/ /sys/firmware/efi/efivars/MokListRT-605dab50-e046-4300-abb6-3dd810dd8b23 /sys/firmware/efi/efivars/BootCurrent-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/PlatformLangCodes-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/ErrOutDev-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/BootOptionSupport-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/ConInDev-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/ConOutDev-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/OsIndicationsSupported-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/OA3MSDMvariable-01368881-c4ad-4b1d-b631-d57a8ec8db6b /sys/firmware/efi/efivars/FPDT_Volatile-01368881-c4ad-4b1d-b631-d57a8ec8db6b /sys/firmware/efi/efivars/PKDefault-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/KEKDefault-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/dbDefault-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/dbxDefault-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/PlatformInfo-10ba6bbe-a97e-41c3-9a07-607ad9bd60e5 /sys/firmware/efi/efivars/S3SS-4bafc2b4-02dc-4104-b236-d6f1b98d9e84 /sys/firmware/efi/efivars/VendorKeys-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/SetupMode-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/SignatureSupport-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/Boot0006-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/Boot0005-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/BootOrder-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/Boot0000-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/MemoryOverwriteRequestControl-e20939be-32d4-41be-a150-897f85d49829 /sys/firmware/efi/efivars/SetUpdateCountVar-81c76078-bfde-4368-9790-570914c01a65 /sys/firmware/efi/efivars/Timeout-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/PlatformLang-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/dbx-d719b2cb-3d3a-4596-a3bc-dad00e67656f /sys/firmware/efi/efivars/ErrOut-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/ConOut-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/Boot0004-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/OfflineUniqueIDEKPubCRC-eaec226f-c9a3-477a-a826-ddc716cdc0e3 /sys/firmware/efi/efivars/OfflineUniqueIDEKPub-eaec226f-c9a3-477a-a826-ddc716cdc0e3 /sys/firmware/efi/efivars/OfflineMemoryDumpUseCapability-77fa9abd-0359-4d32-bd60-28f4e78f784b /sys/firmware/efi/efivars/UnlockIDCopy-eaec226f-c9a3-477a-a826-ddc716cdc0e3 /sys/firmware/efi/efivars/CurrentPolicy-77fa9abd-0359-4d32-bd60-28f4e78f784b /sys/firmware/efi/efivars/MaximumTableSize-4b3082a3-80c6-4d7e-9cd0-583917265df1 /sys/firmware/efi/efivars/SmbiosScratchBuffer-4b3082a3-80c6-4d7e-9cd0-583917265df1 /sys/firmware/efi/efivars/SmbiosV3EntryPointTable-4b3082a3-80c6-4d7e-9cd0-583917265df1 /sys/firmware/efi/efivars/SmbiosEntryPointTable-4b3082a3-80c6-4d7e-9cd0-583917265df1 /sys/firmware/efi/efivars/TrEEPhysicalPresence-f24643c2-c622-494e-8a0d-4632579c2d5b /sys/firmware/efi/efivars/Boot0003-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/ConIn-8be4df61-93ca-11d2-aa0d-00e098032b8c /sys/firmware/efi/efivars/WriteOnceStatus-4b3082a3-80c6-4d7e-9cd0-583917265df1 /sys/firmware/efi/efivars/EfiTime-9d0da369-540b-46f8-85a0-2b5f2c301e15 /sys/firmware/efi/efivars/MemCeil.-01368881-c4ad-4b1d-b631-d57a8ec8db6b /sys/firmware/efi/efivars/nvram-74b00bd9-805a-4d61-b51f-43268123d113 /sys/firmware/efi/efivars/MonotonicCounter-01368881-c4ad-4b1d-b631-d57a8ec8db6b

dmesg | grep bcrm > dmesg.txt Does nothing

I have just plugged in a usb wifi (I believe Realtek) and still nothing

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
5 years 4 months ago #211674 by BeagleBrainz
Replied by BeagleBrainz on topic Installing LCNC on Beelink  BT3 PRO II
Code:
dmesg | grep bcm > dmesg.txt
Creates a text file with the output of the command, instead of sending it to the screen, known as redirection.
[hr]
Code:
tar -cvzf efivars.tar.gz /sys/firmware/efi/efivars/
Creates a compressed named efivars.tar.gz with all the contents of /sys/firmware/efi/efivars
[hr]
I meant can you attach the tar.gz (you will need to change to name to efivars.tar.gz ) & txt files as an attachment. So I can download them and do some magic to hopefully get the on board wifi up.


What does dmesg output before & after plugging in the usb device ?

Run this so you have lsusb
Code:
sudo apt-get install usbutils
Then run
Code:
lsusb

Please Log in to join the conversation.

More
5 years 4 months ago #211749 by htdave
Replied by htdave on topic Installing LCNC on Beelink  BT3 PRO II
With USB Wifi plugged in:
Code:
lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 0bda:f179 Realtek Semiconductor Corp. Bus 001 Device 004: ID 2575:0401 Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 002: ID 0b38:0010 Gear Head 107-Key Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Without:
Code:
$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 2575:0401 Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 002: ID 0b38:0010 Gear Head 107-Key Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Attachment not found

Attachment not found



txt file appears to be empty
It appears that the realtek is being recognised. apart from that, it is beyond my comprehension

Please Log in to join the conversation.

Time to create page: 0.083 seconds
Powered by Kunena Forum