Archive keyserver failing

More
5 years 4 months ago #212959 by bevins
Archive keyserver failing was created by bevins
Can someone else check it? I cannot get the buildbot to work without it.
Code:
I am getting gpg: keyserver receive failed: No name

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
5 years 4 months ago #212960 by BeagleBrainz
Replied by BeagleBrainz on topic Archive keyserver failing
forum.linuxcnc.org/38-general-linuxcnc-q...-05?start=280#212635

There’s a fix there

Please Log in to join the conversation.

More
5 years 4 months ago #212961 by bevins
Replied by bevins on topic Archive keyserver failing

BeagleBrainz wrote: forum.linuxcnc.org/38-general-linuxcnc-q...-05?start=280#212635

There’s a fix there


JT,
Can you fix the buildbot page please?

Thanks Beagle......

Please Log in to join the conversation.

More
5 years 4 months ago #212962 by BigJohnT
Replied by BigJohnT on topic Archive keyserver failing
Only Seb has the keys to the buldbot. An email to Seb is usually enough to get him to fix anything on the buildbot.

JT

Please Log in to join the conversation.

More
5 years 4 months ago #212987 by phillc54
Replied by phillc54 on topic Archive keyserver failing
I have posted a couple of emails on the devs mail list with updates for the buildbot web page since the 2.8 release without success.

Edit: I found an email address and have tried directly...

Please Log in to join the conversation.

More
5 years 4 months ago #213069 by phillc54
Replied by phillc54 on topic Archive keyserver failing
Still no reply, maybe my emails go to his junk box. Could someone else give it a try.

The sample is at:
home.iprimus.com.au/phillcarter/buildbot/
 

Please Log in to join the conversation.

More
5 years 4 months ago #213124 by BigJohnT
Replied by BigJohnT on topic Archive keyserver failing
I didn't get a reply back from Seb either, maybe he's out of town or something.

JT

Please Log in to join the conversation.

More
5 years 3 months ago #215121 by phillc54
Replied by phillc54 on topic Archive keyserver failing
I see the keyserver url is fixed, all we need now is to get the packages list fixed for master branch.

Please Log in to join the conversation.

Time to create page: 0.113 seconds
Powered by Kunena Forum