Installing Beckhoff ethercat 64 bit with linuxcnc

Hi everyone

i followed the Grotius's tutorial to install linux on my machine. But when I arrived at step 2 (ec-debianize) with the command dpkg-buildpackage it gives me the following error

dpkg-source: error: can't build with source format '3.0 (quilt)': no upstream tarball found at ../etherlabmaster_1.5.2+20190904hg33b922p8ea394.orig.tar.{bz2,gz,lzma,xz}
dpkg-buildpackage: error: dpkg-source -b etherlabmaster gave error exit status 255

looking on the internet they say to use the following command
dpkg-buildpackage -b -rfakeroot -us -uc

but this also gives the following error

Can't stat debian/tmp: No such file or directory
 at /usr/bin/dh_install line 288.
dh_install: missing files, aborting
debian/rules:30: recipe for target 'override_dh_install' failed
make[1]: *** [override_dh_install] Error 255
make[1]: Leaving directory '/home/djunior/ec-debianize/etherlabmaster'
debian/rules:15: recipe for target 'binary' failed
make: *** [binary] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2

What can it be due to?

 

Hi,

I think that tutorial is outdated. Some things are changed in the past time.

Try this one.
forum.linuxcnc.org/ethercat/44969-can-t-...file?start=10#233638

If you want to get more insights extract the .deb file and have a look at the postinst file.
To repack the deb you can perform a duckduck.

 

Thanks for the suggestion. I've found this  before and it looks like it works