LinuxCNC on Raspberry Pi 5

Cant do this anymore bye all wrote:

You'll have to look around in /boot

Sorry should have mentioned that.
 

The boot also empty
But at last i can create the config.txt
After reboot no changes...

The BOOT is a different partition with the config.txt and i must to remove the card from the RPi5 and use a card reader. It is not comfortable to make and test the changes...
Before the file was created in the sytems boot folder

So, how can I open this config.txt on the RPi5?

should be in /boot/broadcom/
its just a txt so opening shouldn't be an issue, at least not for me and my installation on pi5

xenon-alien wrote:

The BOOT is a different partition with the config.txt and i must to remove the card from the RPi5 and use a card reader. It is not comfortable to make and test the changes...
Before the file was created in the sytems boot folder

So, how can I open this config.txt on the RPi5?

You can edit the file whilst the system is running only thing is you'll have to open it as superuser....use sudo, if you don't know how to do that just google "sudo". It'll be easier as you'll find something you can understand.

Never, ever run as you'll destroy your system, just in case you see someone recommending doing this.

alpha8196 wrote:

should be in /boot/broadcom/
its just a txt so opening shouldn't be an issue, at least not for me and my installation on pi5
 

You are right. There is a config.txt file and it looks like the opened one on the PC via card reader.
I will try it.
Thanks.

Cant do this anymore bye all wrote:

xenon-alien wrote:

The BOOT is a different partition with the config.txt and i must to remove the card from the RPi5 and use a card reader. It is not comfortable to make and test the changes...
Before the file was created in the sytems boot folder

So, how can I open this config.txt on the RPi5?

You can edit the file whilst the system is running only thing is you'll have to open it as superuser....use sudo, if you don't know how to do that just google "sudo". It'll be easier as you'll find something you can understand.

Never, ever run

Code:

sudo rm -rf / as you'll destroy your system, just in case you see someone recommending doing this.

I'm always use sudo to edit files for network, autologin and else.

But this image for RPi5 i can't understand, how to set up. (no standart configs...)
Left HDMI audio, resolution and the orientation...
But I have no clue which tutorial to use...

Nothing happening after reboot.
Checked the SD card on a PC the BOOT partition's config.txt file is changed, like I did it on the RPi5.

Any ideas?
How to change the resolution, orientation and make it sound?

A connection with a Windows tablet everything is working on the display.

xenon-alien wrote:

Any ideas?
How to change the resolution, orientation and make it sound?

It can be done as you see here
forum.linuxcnc.org/38-general-linuxcnc-q...ge-resolution#292499

elovalvo wrote:

xenon-alien wrote:

Any ideas?
How to change the resolution, orientation and make it sound?


It can be done as you see here
forum.linuxcnc.org/38-general-linuxcnc-q...ge-resolution#292499

Are you telling me that I need to start all settings again with a new image file?
Or there is a video driver, I can use for this image I already have? (Image from the LCNC downlods category)

Excellent image, runs great on a quick test setup using Pi 5 and a Mesa 7i80-HD.

Thanks!