Can't get past "Configuring the Network" Screen on fresh install

Hello All,

I had earlier installed the Sherline EMC2 CD software onto this PC desktop... but that preconfigured system is based on the ancient Ubuntu 12.04 LTS and it cannot seem to find network drivers or PCI parallel port.  So am hoping to just install the latest Debian-based version of LinuxCNC from this website.

HOWEVER... Downloaded the latest LinuxCNC_2.9.2-amd64.hybrid.iso and put onto USB stick using Balena Etcher. Attempted multiple times to install onto Lenovo i3-8100 3.6GHz desktop.  Keeps hanging after I enter the information for either WiFi or LAN access... "Configuring the Network" on sceen... no progress beyond that.

Any suggestions about what I'm doing wrong?  Thank you.

 

I think that this happens if your network does not support IPv6.

There is a way to add a command-line parameter to the boot process to turn off ipv6 - "ipv6.disable=1" which may help. (I don't have installer here so can't give more detailed instructions)

drive.google.com/file/d/1-akVp7OStuMzRxG...Rgi/view?usp=sharing

Here’s a link to an iso that needs testing that attempts to solve that issue

Thanks again… tried that ISO this morning. It worked!

Thanks for the feed back, congratulations on being the first to give feedback.

Yeah... sorry but had flooding on both shops several days back, so for now out of commission cleaning everything.

Cant do this anymore bye all wrote:

drive.google.com/file/d/1-akVp7OStuMzRxG...Rgi/view?usp=sharing

Here’s a link to an iso that needs testing that attempts to solve that issue

What did you change? Do you want to submit a pull request to:  github.com/LinuxCNC/linuxcnc-live-build ?

andypugh wrote:

Cant do this anymore bye all wrote:

drive.google.com/file/d/1-akVp7OStuMzRxG...Rgi/view?usp=sharing

Here’s a link to an iso that needs testing that attempts to solve that issue
What did you change? Do you want to submit a pull request to:  github.com/LinuxCNC/linuxcnc-live-build ?

I think he already has

Moving this discussion to where it belongs, some requirements mentioned there.
forum.linuxcnc.org/9-installing-linuxcnc...dded?start=10#304111

andypugh wrote:

Cant do this anymore bye all wrote:

drive.google.com/file/d/1-akVp7OStuMzRxG...Rgi/view?usp=sharing

Here’s a link to an iso that needs testing that attempts to solve that issue
What did you change? Do you want to submit a pull request to:  github.com/LinuxCNC/linuxcnc-live-build ?

Yep did that, my GitHub name is different to my user name on here. Got am email saying that it had all been accepted.