New and Working RTAI debs for 2.9

andypugh wrote:

The problem with the RTAI kernels is that they are stuck at v5 and they don't have such good hardware support as the preempt-rt kernels.It is also possible that there is a problem with the 5.4.290 kernel as mentioned here:https://forum.linuxcnc.org/9-installing-linuxcnc/53163-new-and-working-rtai-debs-for-2-9?start=60
 
would that be it?

 

I saved some installation files; I meant to delete them, but because they contained important information, they remained.

cnbbom wrote:

would that be it?1 drive.google.com/file/d/1BwlJet6ZcWpXvAUzD2YcM9vvnPTuclaX/view    2 drive.google.com/file/d/1xICFF-2mq_rz-vi.../view?usp=drive_link 3 drive.google.com/file/d/14Z10IOZI5bvgmf_.../view?usp=drive_link 4 drive.google.com/file/d/1fwGb5Qo9pw8lGLp.../view?usp=drive_link

Possibly, though I would need to apply for access as I can't currently view them. 
 

andypugh wrote:

... I can't currently view them. 
 

+1

tommylight post=341235 userid=17274

andypugh post=341234 userid=723... No momento, não consigo visualizá-los. 
 
+1
 
 
Peço desculpas, é que eu não gerencio repositórios e não percebi que os links estavam bloqueados.

1 drive.google.com/file/d/1xICFF-2mq_rz-vi...0W8/view?usp=sharing  

2 drive.google.com/file/d/1WV1pdWmNyH8BmgD...qg-/view?usp=sharing

3 drive.google.com/file/d/14Z10IOZI5bvgmf_...Rn6/view?usp=sharing

4  drive.google.com/file/d/1fwGb5Qo9pw8lGLp...LOE/view?usp=sharing  

andypugh wrote:

cnbbom wrote:

would that be it?1 drive.google.com/file/d/1BwlJet6ZcWpXvAUzD2YcM9vvnPTuclaX/view    2 drive.google.com/file/d/1xICFF-2mq_rz-vi.../view?usp=drive_link 3 drive.google.com/file/d/14Z10IOZI5bvgmf_.../view?usp=drive_link 4 drive.google.com/file/d/1fwGb5Qo9pw8lGLp.../view?usp=drive_link


Possibly, though I would need to apply for access as I can't currently view them. 
 

Is this what you were looking for? Were you able to download it after I checked the Google sharing option?

Yes, it works now, thank you.

tommylight wrote:

Yes, it works now, thank you.

It's a shame I don't have another CPU at the moment to test with. I carefully checked that when configuring a machine in the Step Config Wizard
I can test the xyz axes correctly, the motors rotate, I have a latency of 25000 with YouTube and 9 glxgears. I'm hoping they find a solution. I'll leave a hard drive with 2.92 preempt rt while I do my tasks, but without giving up on having Debian 13, which I really liked.

cnbbom wrote:

I saved some installation files; I meant to delete them, but because they contained important information, they remained.

Thanks for keeping those, I have now uploaded them to the LinuxCNC repository and I have re-issued the 2.9.8 LinuxCNC RTAI package bases on that kernel. 

Please try installing linux-image-5.4.279-rtai, booting from that kernel, them removing linux-image-5.4.290-rtai and rtai-modules-5.4.290 
Then install rtai-modules-5.4.279 and reinstall linuxcnc (should still be v2.9.. 

 

andypugh wrote:

cnbbom wrote:

I saved some installation files; I meant to delete them, but because they contained important information, they remained.
Thanks for keeping those, I have now uploaded them to the LinuxCNC repository and I have re-issued the 2.9.8 LinuxCNC RTAI package bases on that kernel. 

Please try installing linux-image-5.4.279-rtai, booting from that kernel, them removing linux-image-5.4.290-rtai and rtai-modules-5.4.290 
Then install rtai-modules-5.4.279 and reinstall linuxcnc (should still be v2.9.. 


 

The Kernel Headers are not available for download. Is it necessary, or can I use the one I have here?