Linux_Mint_22.1_LinuxCNC_2.10.iso

Ping times look super other than the glitch, also on the latency test.

Could it be a glitch in 6.13.

Try an add on network card, or a USB to LAN adapter.

I was running this computer over a year on 2.9.x with no problems.
Anything is worth a try, new Intel card on order. It should be here tomorrow.

Do you want Linux Mint 19.3 with LinuxCNC 2.8.4 ISO?
It uses 4.19.nn kernel, if i recall correctly, and it works a bit better on my older laptops and PC's.
I can try to upload to google drive, if it fits.

I can go back to a stable Debian system on this computer if needed. I have your original 2.10 on my HP, and it is working. I'm just trying to get the AMD system up with 2.10. It is not a panic situation at all.

Thank you.

 

Good evening Tommy

Can i please get a copy of the 19.3 iso? I have finally gotten myself a touch screen for my project mill and ofcourse, it doesnt work as it turns out to be some funky Quanta OpticalTouchScreen device with a ViewSonic sticker. research suggests other linux (not LCNC) users have used this monitor just fine on older kernel builds so im hopefull the 19.3 iso and associated older RT kernal will work.

Gladly, if i can log into google mail again, something is changing with payments AND my country is being de-listed again as i could not log into paypal also about a month ago.

Cancel that request, it turns out my second hand and still not very cheap monitor is just broken

i suspect the large amount of conflicting "mine works just fine vs mine wont work no matter what" comments online about these quanta optical touch screens are simply a case of one of the dumb little cameras failing. I would learn from my error and avoid!!

back to square one, thanks all the same!

我发现这个版本无法使用 Probe Basic界面， 是桌面环境引起的吗？

Probe Basic is another project separate from LinuxCNC and it is developed on Debian Linux, so this might have missing dependencies for running it.
Use the official ISO for Probe Basic.