Open Source SLS Printer

We are starting up an Open Source SLS Printer project (again) using LCNC as the controller.

We will update things here as well as openlunchbox.com/smf/index.php?board=30.0

Discord Invite: discord.gg/cPC85myEab

Smart move, seeing as the only "cheap" solution got sold and will never ship those.
If you think i can help with anything within my limited time and two shops, i am here and on :
youtube
@toma.cnc1
@toma.3d
@tomapc
instagram
@toma.cnc
@toma.3d
@toma.pc

Jump into whatever you are comfortable with. There will be several variants.

I look forward to seeing how it turns out

It's a please copy us project, vs blab about some design and maybe release files after the kickstarter. This is inspiration for low cost makers of additive tech similar to how mSLA is now available for <$300 using smartphone and tablet LCD panels.
Example: www.amazon.com/ELEGOO-143-43%C3%9789-6%C...Carbon/dp/B095K3JWP3

This project got delayed due to some health issues. Ask away for tech questions.

Peter at Mesa has had the XY2-100 galvo protocol working for quite some time:

forum.linuxcnc.org/additive-manufacturin...ead-protocol-xy2-100

Doesn't use LCNC but it could be easily converted with little effort:  sls4all.com/   
It currently uses Klipper.