Mesa Configuration Tool

More
9 months 3 weeks ago #340929 by JT
Replied by JT on topic Mesa Configuration Tool
It should be in Debian 13 what repositories do you have configured for debian?

Synaptic Package Manager > Settings > Repositories

 

Attachment not found



Note: I don't have Debian 13 installed anywhere to test.

JT

Please Log in to join the conversation.

More
9 months 3 weeks ago #340943 by tommylight
Replied by tommylight on topic Mesa Configuration Tool
Open a terminal and type:
sudo apt update
type the password and hit enter.
Now try to install MesaCT.

Please Log in to join the conversation.

More
9 months 3 weeks ago #340949 by 5_Zylinder
Replied by 5_Zylinder on topic Mesa Configuration Tool
First off, I'm not a computer expert. I've followed all the steps on the website step by step. I've attached a few screenshots. Can anyone tell me how to solve this problem?

Please Log in to join the conversation.

More
9 months 3 weeks ago #340951 by rodw
Replied by rodw on topic Mesa Configuration Tool
Debian packages search says its there in trixie if I correct your spelling error
packages.debian.org/trixie/python3-distro
try: sudo apt install python3-distro

Please Log in to join the conversation.

More
9 months 3 weeks ago #340953 by 5_Zylinder
Replied by 5_Zylinder on topic Mesa Configuration Tool
We already tried that yesterday. But then a new error message appears:

available from another source

Error: Package 'python3-distro' has no installation candidate

cnc@cnc:~$

in a terminal

Please Log in to join the conversation.

More
9 months 3 weeks ago #340955 by JT
Replied by JT on topic Mesa Configuration Tool
I don't see any Debian repositories how did you install the OS?

I'm downloading Debian 13 and installing that on  SSD for testing.

JT

Please Log in to join the conversation.

More
9 months 3 weeks ago #340956 by michaeln
Replied by michaeln on topic Mesa Configuration Tool
there is the package "python3-distro" in Trixie.
But you have to configure the sources correct.
Please look here:
forum.linuxcnc.org/9-installing-linuxcnc...e-with-debian-trixie

Please Log in to join the conversation.

More
9 months 3 weeks ago #340963 by 5_Zylinder
Replied by 5_Zylinder on topic Mesa Configuration Tool
A friend of mine helped me and adjusted the source.list accordingly. Now the Mesa Configuration Tool works.

 

Please Log in to join the conversation.

Time to create page: 0.134 seconds
Powered by Kunena Forum