Error at startup

Hello There, 

I am building my config file, but I'm having trouble when launching my Linuxcnc file. what I am trying to do is sync joints 1 &2 as a single Y-Axis I have configured limit switches on inputs 1 and 2 for each motor joint can someone point me in the right direction I'm not sure what wrong I'm doing here. I will post my INI and HAL files here as well. 

I appreciate any help you can provide. 


Here's my error message at startup  

Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
LINUXCNC - 2.9.3
Machine configuration directory is '/home/cnc/linuxcnc/configs/mesa7i95t-testp1_'
Machine configuration file is 'mesa7i95t-testp1_.ini'
INIFILE=/home/cnc/linuxcnc/configs/mesa7i95t-testp1_/mesa7i95t-testp1_.ini
VERSION=1.1
PARAMETER_FILE=parameters.var
TPMOD=
HOMEMOD=
TASK=milltask
HALUI=
DISPLAY=axis
COORDINATES=YY
KINEMATICS=trivkins coordinates=YY kinstype=BOTH
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: iov2
libnml/buffer/shmem.cc 320: Shared memory buffers toolCmd and toolCmd may conflict. (key=1004(0x3EC))
libnml/buffer/shmem.cc 320: Shared memory buffers toolSts and toolSts may conflict. (key=1005(0x3ED))
libnml/buffer/shmem.cc 320: Shared memory buffers emcError and emcError may conflict. (key=1003(0x3EB))
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Found file(REL): ./main.hal

identityKinematicsSetup: coordinates:YY
   Joint 0 ==> Axis Y
   Joint 1 ==> Axis Y

hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:15:80:6c
hm2_eth: discovered 7I95T
hm2/hm2_7i95.0: Low Level init 0.15
hm2/hm2_7i95.0: Smart Serial Firmware Version 43
hm2/hm2_7i95.0: 58 I/O Pins used:
hm2/hm2_7i95.0:     IO Pin 000 (TB3-02/TB3-03): StepGen #0, pin Step (Output)
hm2/hm2_7i95.0:     IO Pin 001 (TB3-04/TB3-05): StepGen #0, pin Direction (Output)
hm2/hm2_7i95.0:     IO Pin 002 (TB3-08/TB3-09): StepGen #1, pin Step (Output)
hm2/hm2_7i95.0:     IO Pin 003 (TB3-10/TB3-11): StepGen #1, pin Direction (Output)
hm2/hm2_7i95.0:     IO Pin 004 (TB3-14/TB3-15): StepGen #2, pin Step (Output)
hm2/hm2_7i95.0:     IO Pin 005 (TB3-16/TB3-17): StepGen #2, pin Direction (Output)
hm2/hm2_7i95.0:     IO Pin 006 (TB3-20/TB3-21): StepGen #3, pin Step (Output)
hm2/hm2_7i95.0:     IO Pin 007 (TB3-22/TB3-23): StepGen #3, pin Direction (Output)
hm2/hm2_7i95.0:     IO Pin 008 (TB4-02/TB4-03): StepGen #4, pin Step (Output)
hm2/hm2_7i95.0:     IO Pin 009 (TB4-04/TB4-05): StepGen #4, pin Direction (Output)
hm2/hm2_7i95.0:     IO Pin 010 (TB4-08/TB4-09): PWMGen #0, pin Out0 (PWM or Up) (Output)
hm2/hm2_7i95.0:     IO Pin 011 (TB4-10/TB4-11): PWMGen #0, pin Out1 (Dir or Down) (Output)
hm2/hm2_7i95.0:     IO Pin 012 (TB4-14/TB4-15): IOPort
hm2/hm2_7i95.0:     IO Pin 013 (TB4-16/TB4-17): IOPort
hm2/hm2_7i95.0:     IO Pin 014 (TB3-16/TB3-17): IOPort
hm2/hm2_7i95.0:     IO Pin 015 (TB4-20/TB4-21): IOPort
hm2/hm2_7i95.0:     IO Pin 016 (TB4-22/TB4-23): IOPort
hm2/hm2_7i95.0:     IO Pin 017 (TB4-22/TB4-23): IOPort
hm2/hm2_7i95.0:     IO Pin 018 (TB1-01/TB1-09): Muxed Encoder #0, pin Muxed A (Input)
hm2/hm2_7i95.0:     IO Pin 019 (TB1-04/TB1-12): Muxed Encoder #0, pin Muxed B (Input)
hm2/hm2_7i95.0:     IO Pin 020 (TB1-07/TB1-15): Muxed Encoder #0, pin Muxed Index (Input)
hm2/hm2_7i95.0:     IO Pin 021 (TB1-17/TB2-01): Muxed Encoder #1, pin Muxed A (Input)
hm2/hm2_7i95.0:     IO Pin 022 (TB1-20/TB2-04): Muxed Encoder #1, pin Muxed B (Input)
hm2/hm2_7i95.0:     IO Pin 023 (TB1-23/TB2-07): Muxed Encoder #1, pin Muxed Index (Input)
hm2/hm2_7i95.0:     IO Pin 024 (TB2-09/TB2-17): Muxed Encoder #2, pin Muxed A (Input)
hm2/hm2_7i95.0:     IO Pin 025 (TB2-12/TB2-20): Muxed Encoder #2, pin Muxed B (Input)
hm2/hm2_7i95.0:     IO Pin 026 (TB2-15/TB2-23): Muxed Encoder #2, pin Muxed Index (Input)
hm2/hm2_7i95.0:     IO Pin 027 (Internal EncMux): Muxed Encoder Select #0, pin Mux Select 0 (Output)
hm2/hm2_7i95.0:     IO Pin 028 (Internal InMux0): InMux Input Mux #0, pin addr0 (Output)
hm2/hm2_7i95.0:     IO Pin 029 (Internal InMux1): InMux Input Mux #0, pin addr1 (Output)
hm2/hm2_7i95.0:     IO Pin 030 (Internal InMux2): InMux Input Mux #0, pin addr2 (Output)
hm2/hm2_7i95.0:     IO Pin 031 (Internal InMux3): InMux Input Mux #0, pin addr3 (Output)
hm2/hm2_7i95.0:     IO Pin 032 (Internal InMux4): InMux Input Mux #0, pin addr4 (Output)
hm2/hm2_7i95.0:     IO Pin 033 (Internal InMuxData): InMux Input Mux #0, pin muxdata (Input)
hm2/hm2_7i95.0:     IO Pin 034 (TB5-13/TB5-14): SSR #0, pin Out-00 (Output)
hm2/hm2_7i95.0:     IO Pin 035 (TB5-15/TB5-16): SSR #0, pin Out-01 (Output)
hm2/hm2_7i95.0:     IO Pin 036 (TB5-17/TB5-18): SSR #0, pin Out-02 (Output)
hm2/hm2_7i95.0:     IO Pin 037 (TB5-19/TB5-20): SSR #0, pin Out-03 (Output)
hm2/hm2_7i95.0:     IO Pin 038 (TB5-21/TB5-22): SSR #0, pin Out-04 (Output)
hm2/hm2_7i95.0:     IO Pin 039 (TB5-23/TB5-24): SSR #0, pin Out-05 (Output)
hm2/hm2_7i95.0:     IO Pin 040 (internal): SSR #0, pin AC Ref (internal) (Output)
hm2/hm2_7i95.0:     IO Pin 041 (P1-01/DB25-01): IOPort
hm2/hm2_7i95.0:     IO Pin 042 (P1-02/DB25-14): IOPort
hm2/hm2_7i95.0:     IO Pin 043 (P1-03/DB25-02): IOPort
hm2/hm2_7i95.0:     IO Pin 044 (P1-04/DB25-15): IOPort
hm2/hm2_7i95.0:     IO Pin 045 (P1-05/DB25-03): IOPort
hm2/hm2_7i95.0:     IO Pin 046 (P1-06/DB25-16): IOPort
hm2/hm2_7i95.0:     IO Pin 047 (P1-07/DB25-04): IOPort
hm2/hm2_7i95.0:     Found file(REL): ./io.hal
Shutting down and cleaning up LinuxCNC...
iov2: exiting
IO Pin 048 (P1-08/DB25-17): IOPort
hm2/hm2_7i95.0:     IO Pin 049 (P1-09/DB25-05): IOPort
hm2/hm2_7i95.0:     IO Pin 050 (P1-11/DB25-06): IOPort
hm2/hm2_7i95.0:     IO Pin 051 (P1-13/DB25-07): IOPort
hm2/hm2_7i95.0:     IO Pin 052 (P1-15/DB25-08): IOPort
hm2/hm2_7i95.0:     IO Pin 053 (P1-17/DB25-09): IOPort
hm2/hm2_7i95.0:     IO Pin 054 (P1-19/DB25-10): IOPort
hm2/hm2_7i95.0:     IO Pin 055 (P1-21/DB25-11): IOPort
hm2/hm2_7i95.0:     IO Pin 056 (P1-23/DB25-12): IOPort
hm2/hm2_7i95.0:     IO Pin 057 (P1-25/DB25-13): IOPort
hm2/hm2_7i95.0: registered
hm2_eth: in hm2_eth_reset
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments

Debug file information:
iopl() failed: Operation not permitted
cannot gain I/O privileges - forgot 'sudo make setuid' or using secure boot? -parallel port access is not allowed
Note: Using POSIX realtime
./io.hal:6: Pin 'joint.2.home-sw-in' does not exist
8923
Stopping realtime threads
Unloading hal components
iopl() failed: Operation not permitted
cannot gain I/O privileges - forgot 'sudo make setuid' or using secure boot? -parallel port access is not allowed
Note: Using POSIX realtime









 

./io.hal:6: Pin 'joint.2.home-sw-in' does not exist

joint numbers start from 0. Change these two lines in 'io.hal'

to this:

I will give it a try and see how that will go

thank you

Why is there stuff for parallel port?
If not, start over, make a new config, do not fill info at random.

There does not seem to be any parallel port reference in the hal files.

Maybe the generic "cannot gain I/O privileges" message includes
the parallel port warning.

This "cannot gain I/O privileges" message does suggest a build
problem with the LinuxCNC version he is using.

PCW wrote:

There does not seem to be any parallel port reference in the hal files.

Maybe the generic "cannot gain I/O privileges" message includes
the parallel port warning.

Maybe the wrong hal file uploaded?
I am sure i saw this same issue before here, it did have mesa and parallel port stuff for a Mesa only config, usually ends up like this due to just clicking on stuff in the wizards.