HI
A couple of weeks ago i installed a the iso from rodw's google drive, worked fine, no problems.
This time, i tried the one from the downloads page, and also again the google drive one, but i get these errors. I have seen similar errors in this thread, but the sollutions are either not clear or doesnt work for me.
i ran apt update, and also apt upgrade as per the sticky, but these errors appear when i try installing linuxcnc-ethercat. I ran the script from
forum.linuxcnc.org/ethercat/53785-instal...-repositories#309963
but still get errors as seen below
Code:
linuxcnc@linuxcnc:~$ sudo apt install linuxcnc-ethercat
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-6.1.0-23-amd64 linux-headers-6.1.0-23-common
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
autoconf autoconf-archive automake autotools-dev ethercat-dkms ethercat-master libethercat libltdl-dev libtool m4
Suggested packages:
gnu-standards autoconf-doc libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc
The following NEW packages will be installed:
autoconf autoconf-archive automake autotools-dev ethercat-dkms ethercat-master libethercat libltdl-dev libtool linuxcnc-ethercat m4
0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,415 kB/5,387 kB of archives.
After this operation, 86.6 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Ign:1 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-dkms 1.6.1.g419f621-1+8.3
Ign:2 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-master 1.6.1.g419f621-1+8.3
Ign:3 http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12 ./ linuxcnc-ethercat 1.40.0.g8a607c0-0
Ign:1 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-dkms 1.6.1.g419f621-1+8.3
Ign:2 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-master 1.6.1.g419f621-1+8.3
Ign:3 http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12 ./ linuxcnc-ethercat 1.40.0.g8a607c0-0
Ign:1 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-dkms 1.6.1.g419f621-1+8.3
Ign:2 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-master 1.6.1.g419f621-1+8.3
Ign:3 http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12 ./ linuxcnc-ethercat 1.40.0.g8a607c0-0
Err:1 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-dkms 1.6.1.g419f621-1+8.3
Could not connect to opensuse.mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) Could not connect to opensuse.mirror.liquidtelecom.com:80 (197.155.77.1), connection timed out
Err:2 http://download.opensuse.org/repositories/science:/EtherLab/Debian_12 ./ ethercat-master 1.6.1.g419f621-1+8.3
Unable to connect to opensuse.mirror.liquidtelecom.com:http:
Err:3 http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12 ./ linuxcnc-ethercat 1.40.0.g8a607c0-0
Unable to connect to opensuse.mirror.liquidtelecom.com:http:
E: Failed to fetch http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12/all/ethercat-dkms_1.6.1.g419f621-1%2B8.3_all.deb Could not connect to opensuse.mirror.liquidtelecom.com:80 (2c0f:fe40:8001:10::1). - connect (101: Network is unreachable) Could not connect to opensuse.mirror.liquidtelecom.com:80 (197.155.77.1), connection timed out
E: Failed to fetch http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12/amd64/ethercat-master_1.6.1.g419f621-1%2B8.3_amd64.deb Unable to connect to opensuse.mirror.liquidtelecom.com:http:
E: Failed to fetch http://opensuse.mirror.liquidtelecom.com/repositories/science%3A/EtherLab/Debian_12/amd64/linuxcnc-ethercat_1.40.0.g8a607c0-0_amd64.deb Unable to connect to opensuse.mirror.liquidtelecom.com:http:
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
linuxcnc@linuxcnc:~$ sudo apt install linuxcnc-ethercat
E: Conflicting values set for option Signed-By regarding source http://download.opensuse.org/repositories/science:/EtherLab/Debian_12/ ./: /etc/apt/trusted.gpg.d/science_EtherLab.gpg != /etc/apt/trusted.gpg.d/science_EtherLab.gpg.key.binary.gpg
E: The list of sources could not be read.
Any idea how to fix this?
Thanks
Henk
