Ethercat installation from repositories - how to step by step

More
1 year 6 months ago #326886 by Moutomation
The problem was related to the Ethernet settings. It was solved.

Please Log in to join the conversation.

More
1 year 6 months ago #326930 by Soccer Kid
Personally, I think compiling through source code will have a much better effect. Usually, different environments lead to very poor compilation results...

Please Log in to join the conversation.

More
1 year 6 months ago #326931 by rodw
Looks like the path in your ini file  to your Ethercat xml file is wrong

Please Log in to join the conversation.

More
1 year 5 months ago #328860 by kjlty
How to install the latest linuxcnc-ethercat on Debian 10 (lcnc2.94)?

Please Log in to join the conversation.

More
1 year 5 months ago #329034 by rodw

How to install the latest linuxcnc-ethercat on Debian 10 (lcnc2.94)?
Upgrade to Debian 12

Please Log in to join the conversation.

More
1 year 3 months ago #332332 by Tntmold
Is there a repository that currently is complete and works? I have been trying to get an installation working since March with no luck at all. I continually get errors about various components (LCEC, Boost, meson, etc) I have been able to get an "install" using the repository on this thread but it seems to lack full connection to the before mentioned components

Please Log in to join the conversation.

More
1 year 3 months ago #332474 by horcsab
Dear All,

Does anyone have information that the KINCO FD425-EF-000 drive works with linuxcnc? On Ethercat?
Is there an xml file provided by the manufacturer, can I use that?
I haven't connected an Ethercat device to the machine under Linuxcnc yet.

Regards

Please Log in to join the conversation.

More
11 months 1 week ago #338578 by kor
Hi,
I tried to install the linux-ethercat package
but I get the error that they are dependent on other packages: libtool, autoconf, autoconf-archive and automake. which can not be installed.
I do have a freshly installed linuxcnc 2.9.4 preempt-rt installed from the iso image.
 

Please Log in to join the conversation.

More
11 months 1 week ago #338607 by rodw
try
Code:
sudo apt install build-essential and try again

Please Log in to join the conversation.

More
11 months 1 week ago #338627 by kor
after
Code:
sudo apt install build-essential
unfortunatly I receive the same error mesage:
Code:
Die folgenden Pakete haben unerfüllte Abhängigkeiten: ethercat-dkms : Hängt ab von: libtool ist aber nicht installierbar Hängt ab von: autoconf ist aber nicht installierbar Hängt ab von: autoconf-archive ist aber nicht installierbar Hängt ab von: automake ist aber nicht installierbar E: Probleme können nicht korrigiert werden, Sie haben zurückgehaltene defekte Pakete.
unfortunatly in german but basically libtool autoconf, ... can not be installed
I tried to install libtool individually: and I get the error message:
Code:
For the paket libtool there is no install candidate.
(my translation)

Please Log in to join the conversation.

Time to create page: 0.192 seconds
Powered by Kunena Forum