Problems with Lichuan Ethercat servo drive

Thank you @Sandro for sharing the conf!
I can't belief how awesome this community is.

I don't have a machine to move yet, but what I can share is this:
cloud.niguna.ch/s/WgCiCZXoKDGboTY/download/poc.mp4

Windows says I need to pay $1.29 to play that video... wtf. haha.

Haha wtf
It's working for me... maybe try vlc¯\_(ツ)_/¯

Could you explain to me how you calculated the position and velocity scales for each axis?

if you are referring to: This is given by:pitch of your ballsrews / Number of Encoder pulses per revolution.
In this case I would guess:
2^23 / 5   = 1677721.6
i.e. this tells you how many encoder pulses you get per physical movement of your machine.
This would foe example be for an sfu2005 ball screw with a 23bit encoder (23bit = 2^23 = 8388608)
(I'm pretty new to all of this so please correct me if I'm wrong)

put it on youtube like a normal person (and so others will find it, its super hard to find anything on these motors)

Hello, thanks for sharing your configuration. I took a quick look and there is one thing I don't quite understand
net x-output <= cia402.2.velocity-cmd
net x-output <= pid.x.output
Is the direction above reversed? It should be
net x-output => cia402.2.velocity-cmd

Is the direction above reversed? It should be
net x-output => cia402.2.velocity-cmd

That is how I would do it but those directional symbols are for readability only and are ignored when the file is parsed.

Good afternoon.

Using the example provided, I managed to get 1 motor to work... but in my case there are 4 axes. I have already changed the .hal and ethercat.xml and it doesn't work... I follow the example and it crashes again...
They start at 10ry, then I put the cable on and they go to 20ry.
then 1 88ry and the rest 20ry