Linuxcnc's Ethercat in Raspberry pi-5

hello

to update what I wrote here

I resumed the installation of LCNC + etherCAT on native Raspberry Pi 5 OS.

I turned the raspy back on and there were some updates to install, after doing this I ran this in the terminal

everything works on native OS with audio and video graphics ok!!!


 


 
 

Dear jjdege.
How can you solve the error when you install the ethercat package by command "sudo apt install -y linux-headers-(uname -r) ethercat-master linuxcnc-ethercat?