Flex GUI version 1.0.0

JT wrote:

Here's a video showing the safety features of Flex GUI when probing is enabled.

JT
 

I haven't played with Flex since you first posted links some time ago, but I think I'm going to have a go at it soon.

Regarding the probe safety... is this set of features adjustable?  I have a wireless probe and somewhere on the never-ending list of things to do is use M19 to approach the target with the probe in the same orientation every time.

spumco wrote:

JT wrote:

Here's a video showing the safety features of Flex GUI when probing is enabled.

JT
 

I haven't played with Flex since you first posted links some time ago, but I think I'm going to have a go at it soon.

Regarding the probe safety... is this set of features adjustable?  I have a wireless probe and somewhere on the never-ending list of things to do is use M19 to approach the target with the probe in the same orientation every time.
 

Absolutely, all you have to do to have a MDI push button that sends a M19 available during a probe operation is to simply name it probe_some_name. Any widget that starts with probe_ is disabled when not in the probe mode and enabled when probe mode is on.
gnipsel.com/linuxcnc/flexgui/probe.html

JT

A couple of videos from Tom on the IRC





JT

Video showing some of the touch screen features of Flex GUI


JT

Video showing using images as background for buttons.


JT

I'm putting the Flex GUI tutorials here .

JT

Now that I don't have a hurricane to prep for I will give these a look.

Just uploaded the 3rd tutorial


JT