Radios to end of arc differs

Are you using the Post Processor from here:

forum.linuxcnc.org/plasmac/38438-plasmac-post-processors#159042

 

Thank you very much Tommy for your time and your help I am already in the final steps to have the machine 100%

If Phill I am using that same pp for Fusion, it works very well I have cut very good pieces of great quality and precision, but when I have arcs I have that problem and I have to use sheetcam.

Your code shows the same error here, I tried changinging CENTER_ARC_RADIUS_TOLERANCE_MM in the .ini file but that didn't help.

It seems that there is something not quite right with the Fusion post processor, sorry but I can't help with that.

Well after trying many times I realized that the arc errors that I had were due to the Smoothing function of Fusion 360 so I tried with many values, I read in an autodesk forum that it must be 1 to 4 times than the tolerance cut but I did not find the value to make it work so I am working without using that function.

Merged two topic with the same subject started by the same user.
Please refrain from starting new topic for the same subject, and use the search feature.