Gmoccapy - A new screen for linuxcnc

verser
Offline
Senior Member

12 years 7 months ago #44393 by verser

Replied by verser on topic Gmoccapy - A new screen for linuxcnc

Helo, Norbert
I need your help,
Themes and design standart GTK buttons are not displayed on the "EMBED_TAB" panels .
This included version 1.04 gmoccapy-plazma

Attachment not found

This version gmoccapy 1.04 with my addition

Attachment not found

startup log
files.mail.ru/2B9DB08B26A34D9A9A4F3FE3128E6782

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

12 years 7 months ago #44401 by newbynobi

Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc

@verser,

I just pushed the needed changes. See the new file signals.py and the changes of plasma.py.
After you change the theme in gmoccapy, you will have to restart the GUI so the panels can get notice of your changes. Both panels will read the Theme-Name from the preferences file and set it. Would be finer to do that with signals, but I thought the work does not worth it, because the theme changes should not be a think you do every 5 seconds ;-)

Norbert

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

12 years 7 months ago #44431 by newbynobi

Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc

gmoccapy 1.0.5

solves a problem, not creating the jog-incr- hal pin.
With 1.0.5 they are back!

Norbert

Please Log in to join the conversation.

mariusl
Offline
Platinum Member

12 years 7 months ago #44449 by mariusl

Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc

Hi Norbert
I am trying to pull the latest from master but I get this error. Bear in mind that I dont use my local repository to run or edit. I make another repository from my master to work on. So there should never be an edited file on my master. However I still get this.

Code:

Updating 60cd047..b5fecea
error: Your local changes to 'lib/python/gmoccapy/dialogs.py' would be overwritten by merge.  Aborting.
Please, commit your changes or stash them before you can merge.
marius@marius-desktop:~/dev/master$ 

Chris did provide a workaround for the previous one but I would like to know why this is happening now. Is it something on my side or something somewhere else?

Regards
Marius

www.bluearccnc.com

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

12 years 7 months ago #44450 by newbynobi

Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc

Halo Marius,

I guess it has to do with an error I did. I pushed a commit wich destroyed Sebastian Kuzminskis buildbot, so he was forced to repair my stuff. He needed to make a lot of chnages, so please try the following:

Code:

cd ~
cd linuxcnc-dev
git stash save
git pull --rebase
git stash apply

# if that worked out, we compile and make
# it might not be necessary, but this way we are sure
cd ~/linuxcnc-dev
cd src
make clean
./autogen.sh
./configure
make
sudo make setuid

if that does not work, than only a :

git reset --hard origin/master

will save you.

Norbert

Please Log in to join the conversation.

mariusl
Offline
Platinum Member

12 years 7 months ago #44452 by mariusl

Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc

Norbert
I did the hard reset already and compiled as per usual. I then copied the sim directory of gmoccapy to a config directory. I then removed all sim related stuff and I get this when I load. I takes a looong time to load and then the buttons dont work.

Attachment not found

Regards
Marius

www.bluearccnc.com

Please Log in to join the conversation.

mariusl
Offline
Platinum Member

12 years 7 months ago #44453 by mariusl

Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc

Attachment not found

Regards
Marius

www.bluearccnc.com

Please Log in to join the conversation.

verser
Offline
Senior Member

12 years 7 months ago #44455 by verser

Replied by verser on topic Gmoccapy - A new screen for linuxcnc

Norbert, there is a huge request,
to complete the work on the compensation Z (and more) requires space to insert it.
It is possible to add a hide blank panels in gmoccapy.glade here

Attachment not found

and in gmoccapy.py here

Attachment not found

insert code

Code:

if "box_custom" in self.get_ini_info.get_embedded_tabs()[1]:
                widgetlist = ["box_custom_widget1","box_custom_widget2","box_custom_widget3"]
                for widget in widgetlist:
                    self.widgets[widget].hide()
                self.widgets.btn_tool.set_sensitive(False)
                self.widgets.tbtn_user_tabs.set_sensitive(False)

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

12 years 7 months ago #44456 by newbynobi

Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc

Halo Marius,

does gmoccapy start in normal sim mode?

The error is shown in your log file as HAL: ERROR: duplicate component name 'inihal'

I do not know what USERMOT does exactly.

Please post you hal and ini files.

Norbert

Please Log in to join the conversation.

newbynobi
Offline
Platinum Member

12 years 7 months ago #44457 by newbynobi

Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc

@verser,

I am not able to follow you.

In the image showing the themes problem you panel did fit, so why introduce new panels and hide them if custom:box is in embedded tab?

Could you explain more in detail?

Norbert

Please Log in to join the conversation.

Time to create page: 1.851 seconds