Gmoccapy - A new screen for linuxcnc

More
12 years 7 months ago #44468 by verser
Replied by verser on topic Gmoccapy - A new screen for linuxcnc
This problem occurs when in .ini file erase important lines or assigned too large values

Please Log in to join the conversation.

More
12 years 7 months ago #44469 by verser
Replied by verser on topic Gmoccapy - A new screen for linuxcnc
For example here, these
Code:
# Highest value that will be allowed for feed override, 1.0 = 100% MAX_FEED_OVERRIDE = 1 MAX_SPINDLE_OVERRIDE = 1.2 MIN_SPINDLE_OVERRIDE = 0.25
or
Code:
# Max and default jog speeds in units per second MAX_LINEAR_VELOCITY = 18 DEFAULT_LINEAR_VELOCITY = 18 MAX_ANGULAR_VELOCITY = 18

Please Log in to join the conversation.

More
12 years 7 months ago #44478 by mariusl
Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc

newbynobi wrote: Hallo Marius,

I have never seen such numbers on my PC !

May be it is one of your bit-coins, trying to escape ;-)

Can you reproduce that behavior? I guess it is more a problem on your computer.

Norbert


Hi Norbert
It is always there. I shut down the terminal and restarted linuxcnc and the number is there. It seems to be the same number all the time. Something generated from within the Glade maybe?
Regards
Marius


www.bluearccnc.com

Please Log in to join the conversation.

More
12 years 7 months ago #44479 by hobride
Replied by hobride on topic Gmoccapy - A new screen for linuxcnc
Off topic!

verser wrote: No, verser is nickname.
I promote your interface in Russian forum :)
cnc-club.ru/forum/viewtopic.php?f=15&t=4575&p=110957#p110957


Attachment not found



is that a bottle of vodka? ;)

Please Log in to join the conversation.

More
12 years 7 months ago #44480 by verser
Replied by verser on topic Gmoccapy - A new screen for linuxcnc
Yeah, and on the machine - boobs ;)

Please Log in to join the conversation.

More
12 years 7 months ago #44481 by newbynobi
Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc
@verser,

I tried your examples, but I did not get the numbers on my screen.

@Marius,

Please try the following:

get from git the actual glade file and replace the existing one.
Then try again.

If it is still there, please mail me a copy of your config folder.

Norbert

Please Log in to join the conversation.

More
12 years 7 months ago #44483 by verser
Replied by verser on topic Gmoccapy - A new screen for linuxcnc

newbynobi wrote: @verser,
I tried your examples, but I did not get the numbers on my screen.
Norbert


even just a little bit and Compensation Z will be ready with the correct version of the connection
Code:
[DISPLAY] ... EMBED_TAB_NAME = my_new_panel EMBED_TAB_LOCATION = box_custom_2 EMBED_TAB_COMMAND = gladevcp -x {XID} -u compensation_z.py -H compensation_z.hal compensation_z.glade

Please Log in to join the conversation.

More
12 years 7 months ago #44484 by mariusl
Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc

newbynobi wrote:
@Marius,

Please try the following:

get from git the actual glade file and replace the existing one.
Then try again.

If it is still there, please mail me a copy of your config folder.

Norbert


What do you mean with "the actual glade" ? I did a fresh pull after a hard reset last night. Did you push another version since then?
Regards
Marius


www.bluearccnc.com

Please Log in to join the conversation.

More
12 years 7 months ago #44485 by newbynobi
Replied by newbynobi on topic Gmoccapy - A new screen for linuxcnc
Hallo Marius,

no, I did not push a new version, but I want to avoid errors because of old resting files on your computer. I am not sure how make handles files witch exist.

Just go to:

latest glade

Click right on the blue gmoccapy.glade and select save as to save it on your computer.
It belongs to linuxcnc/share/gmoccapy

Then try.

Norbert

Please Log in to join the conversation.

More
12 years 7 months ago #44489 by mariusl
Replied by mariusl on topic Gmoccapy - A new screen for linuxcnc
Norbert
I deleted all my repositories and reinstalled from master. These number only appear in my config.
I run the rotary_mill_253.ini

Attachment not found

Regards
Marius


www.bluearccnc.com

Please Log in to join the conversation.

Time to create page: 0.117 seconds
Powered by Kunena Forum