halui.spindle-override.increase bug ?

YEEESSSSS!

Congratulations, now working !

OK, so one done, one to go
Hope pippin88 will be satisfied too.

Norbert

P.S. By the way, I see you do use hal_manualtoolchange and not the gmoccapy tool change, any reason for that?

P.S. By the way, I see you do use hal_manualtoolchange and not the gmoccapy tool change, any reason for that?

this configuration I did just to show problem , at work I use other !

Norbert,

Thank you!!! The fix works greats. All is working now. I was having problems with reverse before, now that is fixed also it seems.

I have also fixed my config to use gmoccapy tool change.

Is there a way I can make a donation for your efforts?