Error when launching LinuxCNC with Gmoccapy

You do not need to install additional dependencies, as gmoccapy will disable sound output if that module is not installed.
But you do not use the latest release! As mentioned above, I fixed that a couple of days ago. So please pull master and run as rip-environment.

Or do you use buildbot?
Or just the CD Image?

Norbert

same problems again in Debian Buster.

Loads of errors, the errors are not fatal though.


/usr/bin/gmoccapy:326: GtkWarning: Invalid icon size 48

self.widgets.window1.show()
task: main loop took 0.113418 seconds
**** GMOCCAPY INFO ****
**** no audio available! ****
**** PYGST libray not installed? ****
**** is python-gstX.XX installed? ****
**** GMOCCAPY INFO ****
**** Entering init gremlin ****
Kinematics type changed
**** GMOCCAPY GETINIINFO ****
Error converting the file extensions from INI File 'FILTER','PROGRAMM_PREFIX
**** GMOCCAPY GETINIINFO ****
using as default '*.ngc'
**** GMOCCAPY INFO ****
**** virtual keyboard program found : <onboard>
14:16:32.777 WARNING Config: mousetweaks GSettings schema not found, mousetweaks integration disabled.
**** GMOCCAPY GETINIINFO ****
Error converting the file extensions from INI File 'FILTER','PROGRAMM_PREFIX
**** GMOCCAPY GETINIINFO ****
using as default '*.ngc'
**** GMOCCAPY INFO: Gcode.lang found ****

(gmoccapy:2483): GtkSourceView-CRITICAL **: 14:16:33.128: gtk_source_language_manager_set_search_path: assertion 'lm->priv->ids == NULL' failed
**** GMOCCAPY INFO : inifile = /home/xx/linuxcnc/configs/mesa_2019/mesa_2019.ini ****:
**** GMOCCAPY INFO : postgui halfile = postgui.hal ****:
Jog Pin Changed
x+
Jog Button released = x+
Jog Pin Changed
x-
<snip>
3+
Jog Button released = 3+
Jog Pin Changed
3+
Jog Button released = 3+

(onboard:2492): Gdk-CRITICAL **: 14:16:33.444: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
IDLE
(1, 2)
MANUAL Mode
RUN
IDLE


And then there has been for years this misspelling:

4 COORDINATES found = xyyz
('Fount double letter ', )


Norbert you have made a nice piece of software and I am grateful for all your troubles.


Info:

似たような症状がありますが、アドバイスをいただけますか？最近、別のPCに新しいlinuxcncをインストールしました。（linuxcnc-2.8.2-buster.iso）これまでGmoccapyを使用していたので、とりあえず起動したばかりですが、エラーが発生します。   [attachment = 44387] linuxcnc.report.txt [/ attachment]

What screen resolution are you using?
It is complaining about an icon size:


/usr/bin/gmoccapy:311: GtkWarning: Invalid icon size 48

Is it the resolution of my computer monitor?
1600x900

That is OK.
Might want to wait for Norbert to wake up as i can not help any further.

thank you.
I'll try and error while waiting for Norbert to wake up.
 

The only relevant error is:

Error converting the file extensions from INI File 'FILTER','PROGRAMM_PREFIX

Check your INI  File for the Filter  Section and compare with documentation for typos or other errors.

You are using master, that is the development branch, so errors are normal. I have no time at the moment to fix most of them, Fortunately Hans is doing a good job in that. May be in a half year I am able to get back to that project.

Norbert

 thank you for your reply.I'm staring at the filter section now.It doesn't look like there's anything different.I tried the installation on another computer as well, but it gives the same error.   

Thank you Norbert!

Can you also post your HAL-files? It seems not to be a problem with the INI-file.