Smaller hbox_jog [SOLVED]

Yeah I know that ...

@zz912

But if you want to hide something that is not available as an embedded tab, you have to first locate the widget using the glade editor like described here: linuxcnc.org/docs/2.9/html/gui/gladevcp....a_new_user_interface

And then just create a user command file with the line


self.widgets.<widget-name>.hide()

self.widgets.hbox_jog.hide()

for your case.


Another solution for you could also be to remove or reduce the number of step buttons in your ini file (display section).

HansU wrote:

Another solution for you could also be to remove or reduce the number of step buttons in your ini file (display section).

Removing does not work, but you can reduce it to one or two buttons like this

INCREMENTS = 1.000

or this:

INCREMENTS = 1.000 mm, 0.100 mm

HansU wrote:

I think this does what you want. It hides the jog buttons but keeps the slider for the jog rate. The documentation is a bit unprecise at this point, I must admit.

Code:

EMBED_TAB_NAME = some_name EMBED_TAB_LOCATION = hbox_jog EMBED_TAB_COMMAND = hide  

This solved my problem. Thank you.