İnstall glade

wonderfull thank a lot , my linuxcnc project is completed, thanks too you

the color of goccapy is black, but gladevcp is not black, how can I make it black or make a different color 

The user panel seems to follow the system theme, the only way I know is to set the system theme to dark and have Gmoccapy follow that:

1. Go to the 'Appearance' tab on the settings page and set the 'Theme' to 'Follow System Theme':
 

2. Then go to the Debian Desktop Menu->Preferences->Themes, click on the 'Applications' theme selector and select 'Adwaita dark'

3. Restart your Linuxcnc config

While the machine is running, I occasionally get an error and the machine stops and I get the error shown in the picture. How can I solve this?
 

This problem is related to the computer. I have disabled all the features that I can disable in the BIOS and now the problem is not visible.

 

Hello,
Python code crashes several times a day, but linuxcnc works. Strangely, the file does not appear in the changed pin halshow. When I close Linuxcnc and reopen it, it starts working again.

Impossible to troubleshoot just from looking at the code. Start your config from the terminal and check for error messages.

I discovered the reason why the phyton code is not working and I solved it. The problem is that this G code is read from another computer over the network, and when there is a very short interruption in the network, the phyton code turns itself off.

thanks a lot