İnstall glade

More
2 years 2 months ago #308284 by pawel77
Replied by pawel77 on topic İnstall glade
OK thanks if this is the solution. However it changes the layout of elements during opening, I will have to arrange them again. 
I thought the gladevcp of 2.8.4 is better and is available in 2.9.
 

Please Log in to join the conversation.

More
2 years 2 months ago #308365 by Moutomation
Replied by Moutomation on topic İnstall glade
What should I do to ensure that the values ​​I write are not lost and persist when Linuxcnc is turned off and on?

Please Log in to join the conversation.

More
2 years 2 months ago #308366 by Aciera
Replied by Aciera on topic İnstall glade
If you add numbered parameters to your .var file, the added variable numbers should become persistent.

[edit]

 

Attachment not found


www.linuxcnc.org/docs/html/gcode/overvie...:numbered-parameters

As an example if you want parameter #1000 to be persistent you would add this line to the top of your .var file (mind the <tab> in between the two numbers and make sure LinuxCNC is not running when you modify the file):
Code:
1000    0.0

Please Log in to join the conversation.

More
2 years 2 months ago #308372 by Moutomation
Replied by Moutomation on topic İnstall glade
thanks a lot

Please Log in to join the conversation.

More
2 years 2 months ago #308375 by pawel77
Replied by pawel77 on topic İnstall glade

On a locally built (RIP) installation open a terminal and navigate to your linuxcnc installation folder:
Code:
source scripts/rip-environment then to start glade: [code]glade once glade has started, check if the linuxcnc glade widgets have been imported (ie widgets named 'HAL_....')
[/code]
 
I have LinuxCNC 2.9.3 Debian 12 Bookworm PREEMPT-RT ISO , and when i start glade some messages appears.
Then when I open gmoccapy.glade file it looks like widgets are not imported.
Aciera could you help?

Please Log in to join the conversation.

More
2 years 2 months ago #308376 by Aciera
Replied by Aciera on topic İnstall glade
Look like glade is unable to find the LinuxCNC specific widgets.
If you are on a locally built installation (RIP) then you need to setup the environment before starting glade:

Code:
source <your_linuxcncdir>/scripts/rip-environment glade

If you are running a package installation (eg if you have installed linuxcnc from an .ISO or from the package manager ) you need to point glade to the linuxcnc specific glade widget library.
I'm not familiar with this setup but maybe this post helps:
forum.linuxcnc.org/48-gladevcp/48438-how...-glade-folder#266531

[edit]
I just checked on a new debian bookworm installation with linuxcnc installed from the package manager and all that was required was 'sudo apt install glade' to install glade. The widgets are found no problem.

Please Log in to join the conversation.

More
2 years 2 months ago #308383 by Moutomation
Replied by Moutomation on topic İnstall glade
I looked for where we can change the plus and minus limits of these values, but I couldn't find it, for example, the upper limit is 2000, the minus limit is -2000
.testpanel.hal_spinbutton1-f high limit 2000 low limit -2000

Please Log in to join the conversation.

More
2 years 2 months ago #308386 by Aciera
Replied by Aciera on topic İnstall glade
If you cannot find things in the designer it's often quicker to open your .ui in a texteditor:
Code:
<?xml version="1.0" encoding="UTF-8"?> <!-- Generated with glade 3.38.2 --> <interface> <requires lib="gtk+" version="3.0"/> <requires lib="gladevcp" version="0.0"/> <object class="GtkAdjustment" id="adjustment1"> <property name="lower">0.10</property> <property name="upper">200</property> <property name="value">10</property> <property name="step-increment">0.10</property> <property name="page-increment">1</property> </object> <object class="GtkAdjustment" id="adjustment2"> <property name="lower">1</property> <property name="upper">100</property> <property name="value">3</property> <property name="step-increment">1</property> <property name="page-increment">10</property> </object>

sometimes easier to directly change the property there.

Please Log in to join the conversation.

More
2 years 2 months ago #308388 by Moutomation
Replied by Moutomation on topic İnstall glade
great

Please Log in to join the conversation.

More
2 years 2 months ago #308424 by Moutomation
Replied by Moutomation on topic İnstall glade
Aciera,
Thanks to your help, my project is almost finished now. I couldn't have done it without you. First of all, I would like to thank you very much. I am currently planning to put the limits and axis calibrations in the gui, but I do not know where the settings page is, I can change the home page, but I cannot access pages other than the home page.

Please Log in to join the conversation.

Time to create page: 0.063 seconds
Powered by Kunena Forum