Truetype-Tracer not working in Nativecam

Hi Fern,

Attached are the files you requested.





Still having issues with error messages and nativecam not working.

Bill

skrap58 wrote: ...Still having issues with error messages and nativecam not working.

Hi Bill,

What are the error messages ? Post them

Nothing wrong in the files included

What is your os ?

Fern

Hello Fern,

Thank you for the rapid reply. Please excuse my vagueness on the previous post.

OS = Linux Mint 18.2 Sonya with the mate desktop
LInuxcnc version =2.7.10
NativeCAM Version = 0.1.10

The Error messages pop up when I try to open any subroutine. I can clear the message and enter my criteria, the preview shows up as expected but when the run button is selected nothing happens.


The message below is from the circle by center program
Error Message= G code Error in ncam.ngc near line 123 /home/wwp/linuxcnc/configs/my-mill/ncam/scripts unable to open file

The message below is when trying to run TT
Error Message= G code Error in ncam.ngc near line 506 /home/wwp/linuxcnc/configs/my-mill/ncam/scripts unable to open file

Please let me know if you need additional information. As always thank you for your continued support.

Bill

skrap58 wrote: ...the preview shows up as expected but when the run button is selected nothing happens.

Do you know what is 'Block Delete' ?
forum.linuxcnc.org/40-subroutines-and-ng...amed?start=150#83272

Does this solve this problem ?

...The message below is from the circle by center program
Error Message= G code Error in ncam.ngc near line 123 /home/wwp/linuxcnc/configs/my-mill/ncam/scripts unable to open file

The message below is when trying to run TT
Error Message= G code Error in ncam.ngc near line 506 /home/wwp/linuxcnc/configs/my-mill/ncam/scripts unable to open file

This may not be the real error (lcnc bug). Make sure you have selected a end mill suitable for the job

Since I can not reproduce your errors, please create a video and post it

Fern

P.S. 'Tool Change' has been superseeded with 'End Mill Change'. Delete it and replace, then save as default template

Also, try loading some examples

Hello Fern,

I was not aware of the block delete feature. That has solved the problem. I am very pleased with your work and the support is second to none. Keep up the good work.

Thank you

Bill