GUI Modification Code Snippets / Toolbox

#Key a sets a feedrate override of 10%             if kv == gtk.keysyms.a:                 self.sliders['feedrate'].set_slider_value(10)                 return True #Key a sets a spindlee override of 10%             if kv == gtk.keysyms.a:                 self.sliders['spindle'].set_slider_value(10)                 return True #Key a sets a maxvel of 10%             if kv == gtk.keysyms.a:                 self.sliders['maxvel'].set_slider_value(10)                 return True #Key a sets a jog speed of 10%             if kv == gtk.keysyms.a:                 self.sliders['jog_speed'].adjustment.set_value(10)                 return True I hope someone finds this useful.. cheers , Ian  

               # F2 key for zero x             if kv == gtk.keysyms.F2:                 self.enqueue_button_press_release(self.button_list['zero_x'])                 return True                       # F3 key for zero y             if kv == gtk.keysyms.F3:                 self.enqueue_button_press_release(self.button_list['zero_y'])                 return True                # F4 key for zero z             if kv == gtk.keysyms.F4:                 self.enqueue_button_press_release(self.button_list['zero_z'])                 return True                # F5 key for zero a             if kv == gtk.keysyms.F5:                 self.enqueue_button_press_release(self.button_list['zero_a'])                 return True                # F6 key for x divide by 2             if kv == gtk.keysyms.F6:                 self.issue_mdi('G10 L20 P0 X[#<_x>/2.0]')                 return True                # F7 key for y divide by 2             if kv == gtk.keysyms.F7:                 self.issue_mdi('G10 L20 P0 Y[#<_y>/2.0]')                 return True of course correct indents are essential otherwise python throws a fit,..just format all,lines the same as exisying code...