Low budget plasma setup, what do I need?

More
7 years 6 months ago #131939 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
This Shuttle box is not working OK, hardware errors running latency-histogram with or without GLX.
So I will have to find another candidate.

Please Log in to join the conversation.

More
7 years 6 months ago #131954 by andypugh
Replied by andypugh on topic Low budget plasma setup, what do I need?

tecno wrote: This Shuttle box is not working OK, hardware errors running latency-histogram with or without GLX.
So I will have to find another candidate.


Which LinuxCNC version / realtime system?

Please Log in to join the conversation.

More
7 years 6 months ago #131959 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
www.linuxcnc.org/linuxcnc-2.7-wheezy.iso

Please Log in to join the conversation.

More
7 years 6 months ago #131961 by andypugh
Replied by andypugh on topic Low budget plasma setup, what do I need?
I would definitely suggest trying the Stretch ISO then.

www.linuxcnc.org/testing-stretch-rtpreem...tch-uspace-amd64.iso

Please Log in to join the conversation.

More
7 years 6 months ago #131962 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Have to check first that my 7i90HD is ok, did not get mesaflash to find anything on --epp

Is Stretch OK with PPort?

Please Log in to join the conversation.

More
7 years 6 months ago #131963 by andypugh
Replied by andypugh on topic Low budget plasma setup, what do I need?

tecno wrote: Is Stretch OK with PPort?


Yes.

Please Log in to join the conversation.

More
7 years 6 months ago #131965 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
It appears be something wrong with my 7i90HD so I think I will try something else for my simple plasma setup.

Please Log in to join the conversation.

More
7 years 6 months ago #131969 by PCW
Replied by PCW on topic Low budget plasma setup, what do I need?
Did you make sure that your parallel port is set to EPP mode in the BIOS?

Please Log in to join the conversation.

More
7 years 6 months ago #131976 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?

Attachment not found



I get the same error on my laptop also EPP

Please Log in to join the conversation.

More
7 years 6 months ago #131982 by andypugh
Replied by andypugh on topic Low budget plasma setup, what do I need?
You typically need to go in to the BIOS to enable EPP for motherboard parallel ports.

I am not sure how you do it for PCI cards.

Please Log in to join the conversation.

Time to create page: 0.237 seconds
Powered by Kunena Forum