Tumbler Build - For cleaning plasma cut parts.

More
5 years 11 months ago #190193 by Himarc3D
Replied by Himarc3D on topic Tumbler Build - For cleaning plasma cut parts.
I see. The slot was easy to see for me, so no one can mistake when plug it size and reference pins are different. Look really well done this plugs

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
5 years 11 months ago #190219 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Yeah I like the look of the Australian three phase plugs. They seem solid and safe.

Please Log in to join the conversation.

More
5 years 11 months ago #190220 by tommylight
Replied by tommylight on topic Tumbler Build - For cleaning plasma cut parts.

thefabricator03 wrote: Yeah I like the look of the Australian three phase plugs. They seem solid and safe.

Yeaaah forgot to mention that, they do look really nice ! :)
Ours look like .... well plugs .

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
5 years 11 months ago #190386 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Finished plumbing my compressor to my plasma unit,

Used PVC air line pipe and fitting. Makes the job very easy and quick. I have a large PVC tube cutter and cutting through the air line is very quick and leaves a perfect burr free edge.




The fittings have an internal o-ring that provides the seal. Very easy to use.

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
5 years 11 months ago #190477 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Doors sheeted,



I made a set of door locks yesterday and when I was done I sat down and looked at it and thought it looked stupid so I cut it off and welded on some simple pad latched.

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
5 years 10 months ago #191814 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Limit switches mounted



Frame fully welded



Just need to paint, reassemble and finish the wiring.

Please Log in to join the conversation.

More
5 years 10 months ago #191819 by tommylight
Replied by tommylight on topic Tumbler Build - For cleaning plasma cut parts.
Waiting patiently. :)

Please Log in to join the conversation.

More
5 years 10 months ago #191835 by Himarc3D
Replied by Himarc3D on topic Tumbler Build - For cleaning plasma cut parts.
Clean abd organized place. Looks like you dont have problem with space.
You weld and grind at same place?
You paint too or send to to some place?
You guys (Rodw, the draft table guy) have organized place, really clean

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
5 years 10 months ago #191836 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Thanks,

Yeah we weld and grind in the workshop. At the end of our shed we have an enclosed painting bay with large filtered suction fans.

Please Log in to join the conversation.

More
5 years 10 months ago #191841 by Mud
Replied by Mud on topic Tumbler Build - For cleaning plasma cut parts.
What a monster! :)

Please Log in to join the conversation.

Time to create page: 0.133 seconds
Powered by Kunena Forum