Esab Ultrarex UXD-P2000 Upgrade Project

More
6 years 4 months ago #172884 by tommylight
Replied by tommylight on topic Esab Ultrarex UXD-P2000 Upgrade Project
That is the power control box, or power box.
I would not install anything there, to much stuff already.

Please Log in to join the conversation.

More
6 years 4 months ago #172885 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
OK. We will empty the control box and put the computer and the cards there:
Relays have not been delivered yet.

Please Log in to join the conversation.

More
6 years 4 months ago #172895 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
Inside the esab control box NCE290:

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #172896 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
More pics:

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #172897 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
And more pics:

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #172901 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
We have this box behind the X motor. Will this stay?

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #172902 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
The X motor also has a control box behind it. I guess this stays.

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #172903 by Esaber
Replied by Esaber on topic Esab Ultrarex UXD-P2000 Upgrade Project
SO I went back in time and read your post.
The Z motor board goes.
The plasma cutter box stays.
The X/Y motor boards stay

Please Log in to join the conversation.

More
6 years 4 months ago #172907 by tommylight
Replied by tommylight on topic Esab Ultrarex UXD-P2000 Upgrade Project
No, not the board, that is the servo drive for the X axis motor.

Please Log in to join the conversation.

More
6 years 4 months ago #172908 by tommylight
Replied by tommylight on topic Esab Ultrarex UXD-P2000 Upgrade Project
The only things to remove:
Z axis motor to be replaced
Control box electronics where the monitor was.
Nothing else.

Please Log in to join the conversation.

Time to create page: 0.222 seconds
Powered by Kunena Forum