Esab Ultrarex UXD-P2000 Upgrade Project

We'll take our time
Let's wait for esab's move.

Bad news guys
Esab cannot locate any documentation of this machine.
The guy who answered my mail forwarded to his service department. If they find something they will contact me. Gonna e tough

Gona be tougher, but it is doable, so:
- need to locate the drive control wires, fairly easy, should be 3 cables shielded and grounded at the control box
- need to locate 3 encoder cables, easy as they are fully shielded and grounded at the control box
- 3 sensor cables used as home and both limits for each axis
- e-stop loop wiring, again fairly easy as one e-stop is on the control panel
- drive enable wire, this is a bit tricky to find as it goes to the power control box, in my case it was wrong on the schematics
For the encoder cables, be sure to locate the + and - power wires, there are 8 wires for each encoder as they are differential ones. That can be easily done while they are still attached to the old electronics.

Not that tough after all
We have a cable guy in the team.
We are still waiting for the parts.
I'll let you know when we are ready.
Thanks again Tommy.

Esaber wrote: Bad news guys
Esab cannot locate any documentation of this machine.
The guy who answered my mail forwarded to his service department. If they find something they will contact me. Gonna e tough

Thats a shame. I have a friend who has a 1928 Cadillac and he was able to pay $50 and receive a hand written build sheet of that particular vehicle with complete details of paint and upholstery and who did what on the assembly line, I thought that was pretty amazing..

I will contact ESAB France and see what they have to say.

We will make the custom case and mount the cards this weekend.
We haven't yet received the motor and the two parts with it.

RS component relays are not available. I'm going for this pack:

www.amazon.fr/Electronics-Salon-Montage-...dExvZ0NsaWNrPXRydWU=

What do you think guys?

Parts I'm getting from amazon. Not yet ordered. Waiting for your approval

www.amazon.fr/gp/product/B006O8VYXO
www.amazon.fr/gp/product/B07RN3YL1M
www.amazon.fr/gp/product/B00M7W9V0O
www.amazon.fr/WEKON-Adaptateur-Support-M...-Carte/dp/B082CJ8YD5

That should do just fine.