Plasma table controller stations

What is everyone doing for operator stations? Looking for inspiration before building mine.  Thinking something similar to what hornet used to use.

I have PC's with 24" monitors hanging on shop walls.
forum.linuxcnc.org/show-your-stuff/38547...plasma-build?start=0

I am also interested in doing something better, but finding aluminium profiles for anything except windows is impossible here.

Yeah that's what I'm doing right now too.  A station like this would be nice with everything enclosed underneath.  Drawer for consumables etc   

A long while ago I built a console out of 20x20 extrusion:
photos.app.goo.gl/ofvHt2KjUD7bCYAy9
photos.app.goo.gl/Tdg23ZowLrVXF3fC6

A friend built something altogether more professional using purpose-designed extrusion:
photos.app.goo.gl/fJjYYi44ySKBqPk76

For plasma I just use a touch screen with the USFF Pc mounted on the back.

   



I thought this was a bit ugly on the back so I plasma cut an enclosure that contains an Odroid H2+ inside.
 
Note estop reset button on the side out of the road on the right.

Hey guys, I lucked out and got my hands on an old hornet operator station. Stuffed the mach3 stuff in it for now.