GUI for PlasmaC - QtPlasmac

More
5 years 9 months ago #194657 by phillc54
Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac
I have no idea, I will try to replicate it. Are you using a package install of LinuxCNC or a run in place install?

Please Log in to join the conversation.

More
5 years 9 months ago #194659 by cmorley
Replied by cmorley on topic GUI for PlasmaC - QtPlasmac

robertspark wrote:
but stops with an error sayin QTvcp encountered an error

File "usr/lib/python2.7/dist-packages/qtvcp/widgets/ system_tool_button.py", line 106, in set_user_system_text
self.setText(convert[int(data)])
KeyError: 0


Check to see if the dialog said there was more then one error. keep pressing retry untill you get to the #1 error message.
It might help to pin point the trouble.

Please Log in to join the conversation.

More
5 years 9 months ago #194660 by phillc54
Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac
I see an issue with the difference in the paths between package and run-in-place which causes a broken link and incomplete file copying when using a package install. I will have to do a bit of work to find a solution...:(

Please Log in to join the conversation.

More
5 years 9 months ago #194662 by robertspark
Replied by robertspark on topic GUI for PlasmaC - QtPlasmac
buildbot package install following live iso install and upgrade

no, just the one error.

Please Log in to join the conversation.

More
5 years 9 months ago #194663 by phillc54
Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac

robertspark wrote: buildbot package install following live iso install and upgrade

no, just the one error.


Yep, that's my bad. I'll let you know when I have a fix...

Please Log in to join the conversation.

More
5 years 9 months ago #194666 by snowgoer540
Replied by snowgoer540 on topic GUI for PlasmaC - QtPlasmac
EDIT: Moved this error report here as there were two separate errors being reported (qtplasmac pathing, and qtvcp widget error) being reported at the same time, muddying the waters.

Please Log in to join the conversation.

More
5 years 9 months ago #194667 by rodw
Replied by rodw on topic GUI for PlasmaC - QtPlasmac
Bug is confimed on a compile from source right now on the Plasmac sim
Code:
Traceback (most recent call last): File "/home/plasma2/linuxcnc-dev/bin/qtvcp", line 413, in <module> APP = QTVCP() File "/home/plasma2/linuxcnc-dev/bin/qtvcp", line 228, in __init__ window.load_extension(opts.usermod) File "/home/plasma2/linuxcnc-dev/lib/python/qtvcp/qt_makegui.py", line 246, in load_extension methods,self.handler_module,self.handler_instance = self._load_handlers([handlerpath], self.halcomp,self) File "/home/plasma2/linuxcnc-dev/lib/python/qtvcp/qt_makegui.py", line 287, in _load_handlers objlist = h(halcomp,widgets,self.PATHS) # this sets the handler class signature File "/home/plasma2/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 3074, in get_handlers return [HandlerClass(halcomp, widgets, paths)] File "/home/plasma2/linuxcnc-dev/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py", line 131, in __init__ self.mode = int(self.iniFile.find('QTPLASMAC', 'MODE')) or 0 TypeError: int() argument must be a string or a number, not 'NoneType'

Please Log in to join the conversation.

More
5 years 9 months ago #194669 by phillc54
Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac

rodw wrote: Bug is confimed on a compile from source right now on the Plasmac sim


That is a different one, it is because I forgot to rename the [PLASMAC] section of the ini file to [QTPLASMAC]

Please Log in to join the conversation.

More
5 years 9 months ago #194672 by phillc54
Replied by phillc54 on topic GUI for PlasmaC - QtPlasmac
I pushed a fix (I hope :) )

Buildbot will take a while to get to it as it has a couple of builds in queue.

Please Log in to join the conversation.

More
5 years 9 months ago #194673 by rodw
Replied by rodw on topic GUI for PlasmaC - QtPlasmac

phillc54 wrote: I pushed a fix (I hope :) )

Buildbot will take a while to get to it as it has a couple of builds in queue.


Lucky the Aussie day shift is on the ball. Pulled latest master and its working!

Please Log in to join the conversation.

Time to create page: 0.130 seconds
Powered by Kunena Forum