PlasmaC questions new setup

I managed to find a 64GB µSD at home = mediacard in my mobilephone

So a copy of the image boots OK and even after Gparted expansion I now have 54GB free space.

tecno wrote:

Attachment not found

Missed this one at start up

I have now checked all INI files and all are the same as regards [TRAJ], so this error message puzzles me.

phillc54 wrote: You need a valid Cut Speed in the Run Panel before you load/create/reload the file.

I have now checked this issue several times and I can not set any feedrate in Run Panel.

tecno wrote: [TRAJ]
COORDINATES = XYZ
LINEAR_UNITS = metric <<<<<< this
ANGULAR_UNITS = degree
MAX_LINEAR_VELOCITY = 100

LINEAR_UNITS = mm
Sorry i missed it the first go around.

And I am the novice

tommylight wrote:

tecno wrote: [TRAJ]
COORDINATES = XYZ
LINEAR_UNITS = metric <<<<<< this
ANGULAR_UNITS = degree
MAX_LINEAR_VELOCITY = 100

LINEAR_UNITS = mm
Sorry i missed it the first go around.

That took care of the other issue also, now I can set Feedrate in Run Panel

Getting closer

Novice!!!
You can't use that excuse anymore. This is your second machine! :silly: :silly:

3:rd but still novice in LCNC world

tecno wrote: 3:rd but still novice in LCNC world

Yes, 3rd and ...... wait, what?

Sorry I was a bit late for all this...

Good to see you got it going.

From the menu, System > Administration > Raspi Config > Advanced Options > Expand Filesystem

The [TRAJ] error would have prevented PlasmaC from loading its configuration correctly.