Raspberry Pi 4 with PlasmaC

Hi. Is there any news to report on this? Currently tinkering with 2.9.0_pre0 on RaspiOS Bullseye aarch64 5.19.15-rt10-v8+ #1 SMP PREEMPT_RT.

rdtsc wrote:

Hi. Is there any news to report on this? Currently tinkering with 2.9.0_pre0 on RaspiOS Bullseye aarch64 5.19.15-rt10-v8+ #1 SMP PREEMPT_RT.

At this link
forum.linuxcnc.org/9-installing-linuxcnc...cnc?start=150#253623
is available a new image with 2.9.0_pre0 on RaspiOS Bullseye based on
Linux raspberrypi 5.15.65-rt49-v8+ #1 SMP PREEMPT_RT Tue Sep 6 18:12:35 BST 2022 aarch64 GNU/Linux

Just a note, for those new to this... RPI imager will not burn this to a TF (micro SD) card successfully. Use Balena Etcher on the extracted .img file. That will work.

Looks good!  Much further than I was getting with manual builds of everything.  Thank you.

Note, pncconf was giving locale errors, so had to do:

export LC_ALL="en_US.UTF-8" & export LC_CTYPE="en_US.UTF-8" & sudo dpkg-reconfigure locales

en_US was marked and es_US was removed.  When complete, close (in my case kill pncconf) and try again and it works.