PlasmaC not updating

I am having a problem updating the config the one I am trying to update is on linux 2.8 under the config it is showing around V0.124

I have run sudo apt-get update and sudo dist-upgrade without success. I have also tried using through the configurator and clicking on upgrade that tells me it is up to date but it should be showing about V 0.146.

Is there a problem with the linux bot ?

The Buildbot ran out of hard drive space and was fixed yesterday, it looks up to date at the moment.

phillc54 wrote: The Buildbot ran out of hard drive space and was fixed yesterday, it looks up to date at the moment.

Is the version number shown anywhere other than on the config screen. Such as in one of the files

Ie. so that I can see it if there is not a mesa card fitted.

From a terminal enter "man plasmac" it is also in the plasmac_config.py file around a dozen or so lines from the bottom

phillc54 wrote: From a terminal enter "man plasmac" it is also in the plasmac_config.py file around a dozen or so lines from the bottom

Thanks it does not look like its up to date here yet.

That looks like your sources file is incorrect or you have connection problems.

phillc54 wrote: That looks like your sources file is incorrect or you have connection problems.

I have just run it again using the terminal with its saved commands. It ran fine and went through and completed without errors.
I have done this many time before so happy with the commands.

But looking in the plasmac_config.py it still shows . self.plasmacVersion = 'PlasmaC v0.126'

But I don't have a card connected so can't fire up plasmac

Edit: I will go and do it on my machine in the garage

Try running one of the sim configs from the config picker.

phillc54 wrote: Try running one of the sim configs from the config picker.

Good idea. I have just done that. It shows v0.126 .So perhaps the bot has not caught up yet

I updated my local version from the buildbot this morning and it shows v0.146