Want to test MPG

More
5 years 8 months ago #199525 by tecno
Want to test MPG was created by tecno
Hi guys,

Just received my WHB04-6 MPG that is wire connected.
Code:
[HAL] # required TWOPASS = ON # the base machine HALFILE = tecnoplasma.hal # the plasmac component connections HALFILE = plasmac.tcl # the plasmac machine connections HALFILE = tecnoplasma_connections.hal # WHBO4 MPG xhc_whb04b_6.hal # use this for customisation after GUI has loaded POSTGUI_HALFILE = postgui.hal # required HALUI = halui

Testing OK as standalone but nothing in LCNC = shows Lost RF but this is not wireless MPG

Any hints of what might be wrong?

Has anybody made a fancy HAL with bells and whistles for plasmaC + Gmoccapy?

Cheers
Bengt

Please Log in to join the conversation.

More
5 years 8 months ago #199551 by aleksamc
Replied by aleksamc on topic Want to test MPG
I didn't have experiance with this type of MPG, but have you seen this manual

Please Log in to join the conversation.

More
5 years 8 months ago #199555 by tecno
Replied by tecno on topic Want to test MPG
UDEV was missing and some editing within xhc-whb04b-6 halfile and the MPG is up and running.

# WHBO4 MPG
xhc_whb04b_6.hal

HALFILE = was missing :(

Above on my laptop SIM GMOCCAPY

My RPi4 suddenly it does not boot

Please Log in to join the conversation.

More
5 years 8 months ago #199643 by tecno
Replied by tecno on topic Want to test MPG
So I managed to get boot functioning on the RPi4

But nothing works on the MPG with PlasmaC.

Anybody having this type of MPG working with PlasmaC willing to share suitable halfile?

I do believe my new USB thumb memory said not to be Linux compatible might have caused the SSD boot havoc, the whole system freezes kind of and nothing works.

Please Log in to join the conversation.

More
5 years 8 months ago #199681 by phillc54
Replied by phillc54 on topic Want to test MPG
You will probably need to rearrange some hal logic to suit the pendant.

I use a XHC-HB04 so I don't know if this will be any help but my hal file is attached.

Please Log in to join the conversation.

More
5 years 8 months ago #199702 by tecno
Replied by tecno on topic Want to test MPG
Am getting closer but looks like ./plasma_table.ini is missing

Cheers
Bengt

Please Log in to join the conversation.

More
5 years 8 months ago #199708 by tecno
Replied by tecno on topic Want to test MPG
Here errors I get now, beginning to think that RF and FIXED cable variants are not the same. I hope I am wrong :)
Code:
pi@pi4-mate:~ $ linuxcnc LINUXCNC - 2.8.1-57-gdca6f8d05 Machine configuration directory is '/home/pi/linuxcnc/configs/tecnoplasma' Machine configuration file is 'tecnoplasma.ini' Starting LinuxCNC... twopass:invoked with <> options twopass:found ./tecnoplasma.hal twopass:found ././plasmac/plasmac.tcl twopass:found ./tecnoplasma_connections.hal twopass:found ./pendant.hal twopass:pass0: loadusr -W xhc-hb04 -I ./tecnoplasma.ini -H -x -s 1 xhc-hb04: waiting for XHC-HB04 device Waiting for component 'xhc-hb04' to become ready.....................xhc-hb04: waiting for XHC-HB04 device (5) ..........xhc-hb04: waiting for XHC-HB04 device (6) .........xhc-hb04: waiting for XHC-HB04 device (7) ..........xhc-hb04: waiting for XHC-HB04 device (8) ..........xhc-hb04: waiting for XHC-HB04 device (9) ..........xhc-hb04: waiting for XHC-HB04 device (10) ..........xhc-hb04: waiting for XHC-HB04 device (11) xhc-hb04: MAX_WAIT_SECS exceeded, exiting twopass: Error in file ./pendant.hal: waitpid failed xhc-hb04 xhc-hb04 xhc-hb04 exited without becoming ready Shutting down and cleaning up LinuxCNC... Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/pi/linuxcnc_debug.txt and /home/pi/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal pi@pi4-mate:~ $

Please Log in to join the conversation.

More
5 years 8 months ago #199718 by tecno
Replied by tecno on topic Want to test MPG LHB04-6
To straighten up my MPG model is LHB04-6

So is it so that I need yet another hal-file for this pendant?

forum.linuxcnc.org/24-hal-components/378...lved?start=50#157515

Is this compiled to the existing HB04-6 ??

Please Log in to join the conversation.

More
5 years 8 months ago #199761 by tecno
Replied by tecno on topic Want to test MPG LHB04-6

Attachment not found


Attachment not found


Attachment not found


Attachment not found




Edit//
# default function button signals WORKING
net pdnt.button.m-home whb.button.m-home halui.home-all # Homing use built-in halui home all

# axis position related signals feedback WORKING
net pdnt.axis.x.pos-feedback halui.axis.x.pos-feedback whb.halui.axis.x.pos-feedback
net pdnt.axis.y.pos-feedback halui.axis.y.pos-feedback whb.halui.axis.y.pos-feedback
net pdnt.axis.z.pos-feedback halui.axis.z.pos-feedback whb.halui.axis.z.pos-feedback

Please Log in to join the conversation.

More
5 years 8 months ago #199813 by tecno
Replied by tecno on topic Want to test MPG LHB04-6
What am I missing ?

TEST MPG HAL just to see that I can select axis

LCD get updated so this code works
Code:
loadusr -W xhc-whb04b-6 -HfsB # ABSOLUTE POSITION LCD net pdnt.pos-x halui.axis.x.pos-feedback => whb.halui.axis.x.pos-feedback net pdnt.pos-y halui.axis.y.pos-feedback => whb.halui.axis.y.pos-feedback net pdnt.pos-z halui.axis.z.pos-feedback => whb.halui.axis.z.pos-feedback Using AXIS and I can not select axis. # "selected axis" signals net pdnt.axis.x.select whb.halui.axis.x.select => halui.axis.x.select halui.joint.0.select net pdnt.axis.y.select whb.halui.axis.y.select => halui.axis.y.select halui.joint.1.select net pdnt.axis.Z.select whb.halui.axis.z.select => halui.axis.z.select halui.joint.2.select

HAL
Code:
# Joint 0 # axis enable chain newsig emcmot.0.enable bit sets emcmot.0.enable FALSE net emcmot.0.enable <= joint.0.amp-enable-out net emcmot.0.enable => hm2_[HOSTMOT2](BOARD).0.stepgen.00.enable pid.0.enable

Please Log in to join the conversation.

Time to create page: 0.066 seconds
Powered by Kunena Forum