Help install "QtPlasmac" !!

Help install "QtPlasmac" !!

Please, do I need help installing and operating any plasma cutting interface
For more than a week, I tried to install one interface, and I couldn't install anything correctly:(
I seek help, even if it is for a fee
Thank you

We need a bit more information if we are to help, what have you tried? What exactly are you having trouble with?

Using a sim will not control the machine, it is for testing software only.
Find the created config directory, there is a file with .ini extension, right click on it and choose "open with other app" or similar, then type "linuxcnc" in the box and press enter.

You also really need to update. You are on a really old version. Current qtplasmac version is 1.0.31

Have you given the user guide a good read/follow: linuxcnc.org/docs/devel/html/plasma/qtplasmac.html

I've tried the "axis" interface and it works, all drives are working properly, and I'm using a breakout board control.
The problem is when I want to work on one of the other graphical interfaces such as "qtplasma", it does not work because there are settings in "ini, hal" files and I face many problems because I am not an expert in "linux" systems.

I have tried but a lot of bugs appear
Please can you access a remote device?
And looking at my system files?

There are a lot of details and I do not understand them
If you can help me
Will I send the access data to my remote device?

The picture that appears in the post is not from my device, but is for illustration only

I did not find this file through which I can configure my machine to run with the "qtplasmac" interface

More info and screenshots/files of the errors you are getting, otherwise we are unable to help.
What plasma? What Linux? Version of LinuxCNC? everything...