setup qtplasmac

With the network cable, the internet and the 7i80 work together and the latency errors seem to have disappeared as well. often,   the mesa is not seen and I have to turn it off and on again to work, surely the interfaces file is done at random because before I had done it in a graphic way ... I am attaching it if someone (Rod) helps me to fix it
 

Is eth0 the name of the NIC? they are often different to that.
I think ip a (or ip -a) will tell you

Here is the result of ip a: eth0 and eth1 seem right to me.

billykid wrote:

Here is the result of ip a: eth0 and eth1 seem right to me.

Looks right.

should I start everything and turn on the mesa later or all together? because sometimes the mesa doesn't work and I have to turn it on and off to make it work.

Yup that looks OK.
Are you using WiCD by any chance ?

now i don't use wifi only cable. with wicd it worked one connection at a time and every now and then latency error that now seems to disappear.
MX 19

Just went back over this, so
-hijacking topics/threads is not nice
-i have no clue what exactly your having issues with as you keep spoon feeding us info
--
Can you please sit down and write exactly what the issues are?
-ping 10.10.10.10
-latency-histogram --nobase --sbinsize 1000 --show
-uname -a

Sorry Tom the main problem is the translator I wanted to list the behavior with wifi and with cable. with the cable I have no latency problems and I use that. only problem with the cable is that at start up sometimes the mesa is not ready ... I have to remove the 5 volts and give them back to make it work, only this is wrong.

ip a
ping 10.10.10.10
Do this when everything is working, and when it is not working.
Also, what 5V power supply are you using and do you have any other ?