setup qtplasmac

i disabled the wifi interface in the bios, tried a few starts and it always worked. if the problem recurs I will do the tests you said. the power supply is a 5 volt 5 amp dc dc converter
I think it's reliable but just in case I try another one.

it.rs-online.com/web/p/convertitori-cc-cc-isolati/0592379
 

Yeah that looks like a really nice dc-dc converter, so we go back to chasing network issues.

I have the data of "ip a" when neither mesa nor network works and the other with both working. i used a usb network adapter for internet, it seems that when it is not detected not even the mesa works. I changed the usb port and for now it works ... I am attaching the 2 files thank you

Start a new topic in the computers section, this has nothing to do with QtPlasmaC.
Please attach all the info you gathered.
Also when it stops working, unplug and plug back the cable to mesa board, see if that brings it back.

Right Tom! if the problem occurs again I will open a topic in the right place with all the possible data.

billykid wrote:

Right Tom! if the problem occurs again I will open a topic in the right place with all the possible data.

Are you using a USB-eth adaptor. If so this might be the problem

yes i am using a usb eth converter and i think you are right.
if i don't solve i open an argument in mx since i use that. thank you