QtPlasmaC update problem

More
5 years 6 days ago #224190 by CFE
Replied by CFE on topic QtPlasmaC update problem
Hi Phil,

I have attached the s requested.

Please Log in to join the conversation.

More
5 years 6 days ago #224191 by phillc54
Replied by phillc54 on topic QtPlasmaC update problem
There is no attachment.

Please Log in to join the conversation.

More
5 years 6 days ago #224192 by CFE
Replied by CFE on topic QtPlasmaC update problem
Oops, sorry, I thought I did.

Attachment not found

Please Log in to join the conversation.

More
5 years 6 days ago #224193 by phillc54
Replied by phillc54 on topic QtPlasmaC update problem
Well, that looks OK, I am stumped...

If you run linuxcnc in a terminal what version is reported in the terminal?
 

Please Log in to join the conversation.

More
5 years 6 days ago #224195 by CFE
Replied by CFE on topic QtPlasmaC update problem
This one : LINUXCNC - 2.9.0-pre0-4558-gc9e8b173b

Please Log in to join the conversation.

More
5 years 6 days ago #224196 by CFE
Replied by CFE on topic QtPlasmaC update problem
And that's exactly the same as when I use the icon on our desktop to open linuxcnc

Please Log in to join the conversation.

More
5 years 6 days ago #224197 by phillc54
Replied by phillc54 on topic QtPlasmaC update problem
It should be LINUXCNC - 2.9.0-pre0-4846-gb4eabbe1a

Open Synaptic and click the Search button on the right side then enter linuxcnc and check the result, it should be like the attachment. 

 

Attachment not found

Please Log in to join the conversation.

More
5 years 6 days ago #224198 by CFE
Replied by CFE on topic QtPlasmaC update problem
Well, that's certainly different. Strange, I have done update and dist-upgrade only an hour or 2 ago

Attachment not found

Please Log in to join the conversation.

More
5 years 6 days ago #224199 by phillc54
Replied by phillc54 on topic QtPlasmaC update problem
Yeah, it doesn't make sense.

Can you got to Synaptic Settings > Repositories and make sure they match and are the only two linuxcnc repos that are checked.

 

Attachment not found



 

Attachment not found

Please Log in to join the conversation.

More
5 years 6 days ago #224200 by CFE
Replied by CFE on topic QtPlasmaC update problem
Hi Phil, done that, and they are as per your image. Try update and dist-upgrade again ?
 

Please Log in to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum