Toggle program coordinate system to machine coordinate system

Daddio
Topic Author
Offline
Junior Member

3 years 11 months ago #256319 by Daddio

Toggle program coordinate system to machine coordinate system was created by Daddio

Hello all,
Is it possible to toggle the coordinate system in the DRO display from program coordinates to machine coordinates and back again? I am running QtPlasmaC on LinuxCNC 2.9.
Thanks!

Please Log in to join the conversation.

snowgoer540
Offline
Platinum Member

3 years 11 months ago #256358 by snowgoer540

Replied by snowgoer540 on topic Toggle program coordinate system to machine coordinate system

Maybe this thread will help:

forum.linuxcnc.org/plasmac/43381-showing...-coordinates?start=0

Please Log in to join the conversation.

Time to create page: 0.110 seconds