Save Material Can't be changed

More
3 years 2 months ago #278978 by aabtech
Save Material Can't be changed was created by aabtech
In the video you will see I have selected a 3mm saved material which have been saved in QtPlasmaC but when I select and save for cutting It select 3mm and when cutting it select Temporary which is gcode from SheetCAM I generated an come back to 3mm after cutting. 

Please Log in to join the conversation.

More
3 years 2 months ago #278979 by phillc54
Replied by phillc54 on topic Save Material Can't be changed
I don't see a video...

There are a couple of odd things happening in the materials handling, we are currently working on it and should have it finished tomorrow.

Edit: Can you post the video so we can make sure your issue gets fixed with our changes.
 

Please Log in to join the conversation.

More
3 years 2 months ago #278985 by phillc54
Replied by phillc54 on topic Save Material Can't be changed
That is fixed in the changes that we are testing.
 

Please Log in to join the conversation.

More
3 years 2 months ago #279058 by phillc54
Replied by phillc54 on topic Save Material Can't be changed
The changes have been pushed.
 

Please Log in to join the conversation.

More
3 years 2 months ago #279074 by aabtech
Replied by aabtech on topic Save Material Can't be changed
I have updated linuxcnc but still the
Same problem

Please Log in to join the conversation.

More
3 years 2 months ago #279077 by phillc54
Replied by phillc54 on topic Save Material Can't be changed
Has the buildbot you updated from finished building or are you using a RIP installation.

 

Please Log in to join the conversation.

More
3 years 2 months ago #279079 by aabtech
Replied by aabtech on topic Save Material Can't be changed
Am using Debian 12 buildbot2.
It has finished building but still no change.

Please Log in to join the conversation.

More
3 years 2 months ago #279087 by snowgoer540
Replied by snowgoer540 on topic Save Material Can't be changed
What version does it say in the window title?

Please Log in to join the conversation.

More
3 years 2 months ago #279100 by aabtech
Replied by aabtech on topic Save Material Can't be changed
 

Attachment not found

Please Log in to join the conversation.

More
3 years 2 months ago #279102 by snowgoer540
Replied by snowgoer540 on topic Save Material Can't be changed
Latest version is v1.236.288

Buildbot might not be done, or is hung up.

Please Log in to join the conversation.

Time to create page: 0.796 seconds
Powered by Kunena Forum