Save Material Can't be changed

I apologize, I'd been away for the weekend.

You need to remove this line from your G-Code file, and then you can run it with any material you'd like:

Subsequently, if this is what you want to do with every g-code file, then you need to tweak the post processor options so that it doesnt use temporary materials. Or, remove the line each time.

Here's a video showing it working:



I attached the modified G-Code file to this post.

Lastly, your cut order in the G-Code file is a bit off. You should cut the features internal to the profile (circles and slots) before cutting the profile.

 Thanks very much it is working.
but in previous versions it will changed the material and  give you an operator error but it will cut.
 
  

Time to upgrade.

Version v1.235.264 was released on January 24, 2023 (7 months and 1 week ago).   There were many improvements made with material handling in the recent versions.

      every thing was working fine but now if i on QtPlasmaC i get the above error message

Looks like your material file may have saved a temporary material from when this wasnt working correctly.

Open your material file (<machine_name>_material.cfg) from your config folder and delete any materials that are ≥ 1000000

That should do the trick.

Now is working no error message
Thanks very much.

Glad I could help/it was easy.

Happy cutting!