Connecting Siemens NX to LinuxCNC

More
2 years 3 months ago #304888 by syschkr
Connecting Siemens NX to LinuxCNC was created by syschkr
Is there any postprocessor for Siemens NX to generate G-code compatible with LinuxCNC?

Please Log in to join the conversation.

More
2 years 3 months ago #304893 by Aciera
Replied by Aciera on topic Connecting Siemens NX to LinuxCNC
Have a look here:
forum.linuxcnc.org/post-processors/52105...iemens-nx-cam#296450

Please Log in to join the conversation.

Time to create page: 0.070 seconds
Powered by Kunena Forum