Show your screens

github.com/leonpk82/vcp4

This is the UI I use on my Optimum BF20 mill.  The mill has stepper motors but with linear glass scales which provide the absolute position feedback into the pid.  I have some UI elements to assist in checking that feedback performance to ensure cutting operations are tracking within 0.01 - 0.03mm, particularly on finishing operations. I typically can get <=0.025mm tolerance with some proper thought on the CAM and order of operations.

Inspiration and support from work done by JT and Lcvette

Cheers - J.

 
 
 
 
 
 
 
 
 

That diagnostics screen is fantastic.  Do want.

spumco wrote:

That diagnostics screen is fantastic.  Do want.
 

github.com/joco-nz/bf20_mill

 

Hello! Please tell me how to open your interface in linuxcnc 2.9.0 pre. if possible. Upon attempt open I get an error like in the screenshot. Thanks!

There are two branches.  One called "master" and another "master_py3".  Active development is on the later and expects a working py3 environment.  At the moment I have only tested/used master_py3 on Debian 11.
 

@ anfänger

Nice work on the update to probe_basic.  The status tab is perfect!  I see this is an older post, but maybe you can share the update or some notes on how you made it.  I want to create something very similar.  Newbie here and not sure where to start.