QtPyVCP - Probe Basic Vertical

More
5 years 6 months ago #205061 by OpenDev
QtPyVCP - Probe Basic Vertical was created by OpenDev
Hello

Have Linuxcnc 2.8.1 with Probe Basic v0.3.4 running and working. So far so good.

But i want to try Probe Basic Vertical... but there is no sample config..

i have done the compiling:
Code:
qcompile home/cnc/probe_basic/probe_basic_vertical

what now?

Please Log in to join the conversation.

More
5 years 6 months ago #205122 by Lcvette
Replied by Lcvette on topic QtPyVCP - Probe Basic Vertical
Vertical is out of date and requires major updating, probably not going to happen in the immediate future as I'm focused on lathe and conversational at the moment. Unless someone wants to jump in and help! :D

Please Log in to join the conversation.

More
5 years 6 months ago #205232 by OpenDev
Replied by OpenDev on topic QtPyVCP - Probe Basic Vertical
Oh i understand. At the moment i don't have the knowledge. But thank you for the nice interface!

Please Log in to join the conversation.

More
5 years 1 day ago #224686 by spumco
Replied by spumco on topic QtPyVCP - Probe Basic Vertical
Am I right in thinking I saw some updates in the PB Vertical branch on github a couple days ago?

Is it ready - or close - for prime time?

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum