Probe Basic Configuration

Oooops, i wrote KCJ name wrong, sorry KCJ.

Much appreciated!  and I agree with your assessment of the spindle gage line method, this was the only way I considered building probe basic to function for tool and probing ops.  it makes each tool unique t the spindle itself which should be the one thing that remains constant no matter what happens to the machine or other tooling. 

Lcvette wrote:

which should be the one thing that remains constant no matter what happens to the machine or other tooling. 

Barring crashes, of course.

If the spindle nose to table relationship changes.. you have larger issues... /o\ 

Hi All,
This thread was the only one I could find that addressed this A axis DRO issue in PB. I just recently did a fresh install of lcnc 2.9_pre0 and PB using joco's script. I also installed this on the linked Bullseye iso from that script.

Has anyone else run into this problem again since the original post in August? I am still experiencing this issue even after trying the fix that charleyann found. Additionally, when I changed the axis display rule from axes to joints to try the fix, I was not allowed to change it back to axes.

Any help would be greatly appreciated!

Bump. Really hoping someone has some thoughts as this is still an issue for me. Thanks

You can try contacting them on the IRC, they have their channel wtitten somewhere on github i think.

I will take a look in a few and aee if i can suss out the issue.

I made a small change to me original fix for the axis_display_rule on the gui_axis_display_widget
Change the channel to: "status:joints" and set the type to int.
Set the expression to 0 for the XYZ display, 1 for XYZA and 2 for XYZAB

Attached is a screen clip of the settings.

 

Big thanks, charleyann! Changing the expression brought the A axis DRO out for me!