Probe Basic Transition from Axis

More
2 years 10 months ago #288917 by dpslwk
Replied by dpslwk on topic Probe Basic Transition from Axis
seem you have moved all the HAL around trying split into multiple files??

and in doing so you have commented out the command that are setting up the mesa card (realtimecomponents.hal)

Please Log in to join the conversation.

More
2 years 10 months ago #288925 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
 

Attachment not found

You were right. I've changed everything, and now Probe Basic (PB) is working. However, I'm having trouble powering on the machine as before, and I've already looked into the E-Stop connection issue. When I make changes and press X-view, for example, the following error appears.

Please Log in to join the conversation.

More
2 years 10 months ago #288927 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
 

Attachment not found



This is now my config. I already can open it. But it looks like there are something missing.

Please Log in to join the conversation.

More
2 years 10 months ago #288940 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
If I configure it with only 1 hal file, will it be better?
Isn't this a Probe Basic bug?

Please Log in to join the conversation.

More
2 years 10 months ago #288945 by rodw
Replied by rodw on topic Probe Basic Transition from Axis
Just keep commenting out pins until it opens and review for the correct pin names.
Linuxcnc always tells you the file and line number the error is on.

Typographic errors like this  are not linuxcnc or probe basic bugs. They are on you.
 

Please Log in to join the conversation.

More
2 years 10 months ago #288968 by Unlogic
Replied by Unlogic on topic Probe Basic Transition from Axis
I ran into this very same error message, solved it by moving the initialization of my custom hal code after the postgui stuff for probe basic.

Please Log in to join the conversation.

More
2 years 10 months ago #289014 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
You run PB with ATC?

Please Log in to join the conversation.

More
2 years 10 months ago #289046 by Unlogic
Replied by Unlogic on topic Probe Basic Transition from Axis
Nope, manual tool changes.

Please Log in to join the conversation.

More
2 years 10 months ago #289072 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
To do ATC config, I need to create a XYZA config or just XYZ and then attribute the motor control to an ATC hal without joint 4?

Please Log in to join the conversation.

More
2 years 10 months ago #289098 by OldSQL
Replied by OldSQL on topic Probe Basic Transition from Axis
Well, now i can run all the probe basic without any problem, however, i cant home my atc.
Can anyone help me by checking what is missing in my files ? 


Attachment not found

Please Log in to join the conversation.

Time to create page: 0.062 seconds
Powered by Kunena Forum