Paid Consulting Opportunity

Hi everyone,

My team is using ProbeBasic / Linux CNC on a 5-axis CNC milling machine we are developing.  We've got most everything up, but don't have the INI file for the machine working properly.  To be specific, we're getting a lot of out of bounds and tool change errors.  Many (most) of the example NGC files that come with LinuxCNC don't work.  We fix one thing just to run into another blocker.  We could use some paid help.

If you're interested, email dan@thorside.com with the following:

• Your name / email / phone
• Resume (highlighting LinuxCNC work)
• Your general coding / management style
• What time zone you're in
• Your desired rate

We'll get back you super soon.
Thanks so much!

Not me, despite really needing the money, i never charge for any help here or when initiated from here, and i am of no use for Probe Basic, yet.
For other things related to LinuxCNC, i am here often and daily, so feel free to shoot questions here.

tommylight wrote:

Not me, despite really needing the money, i never charge for any help here or when initiated from here, and i am of no use for Probe Basic, yet.
For other things related to LinuxCNC, i am here often and daily, so feel free to shoot questions here.
 

You're Mr. Helpful, Tommy - no sarcasm at all.

I suspect the OP has an issue with the Probe Basic ATC control scheme not meshing with their hardware.  Same thing I ran in to when I was setting up my mill - I don't have a 'dumb' on/off motor with geneva drive, so the ATC subroutines aren't gonna work.

I'm betting that as a business they would rather spend money to get things sorted than go back-and-forth over the forum for days/weeks.  Regardless of how awesome the forum members are, sometimes you just want to buy your way out of a jam.