Error Messages

Try changing the sys_notify.py file to mine. Change from root!

ALARMS window clicked button CLEAR ALARMS error. I eat close the error window, the interface closes.

ok I'll check it out.

Hi Chris

Could you please help me track down what is causing the following start-up error in my custom QTDragon config?

"VCPWindow' object has no attribute 'chk_alpha_mode_checked'"

The SIM version works fine

Cheers
Bruce

Are you using a custom .ui file, but using the default handler file?
there was some additions to the qtdragon ui file that are probably not on your custom one. 'chk_alpha_mode_checked'" is an option for the gcode display.
You'll find a checkbox on the setting page. There is another one to inhibit mouse selection. If you add these with the appropriate name then things should be fine.

You can avoid this problem in the future by copying the handler file into your config file just like the .ui file. Then qtvcp will use the custom handler file rather then stock one. This of course means you won't get any updates on either but I'm sure you are aware. When 2.8 is released (if that's what you are using) there shouldn't be many anyways.

Chris

hottabich wrote: ALARMS window clicked button CLEAR ALARMS error. I eat close the error window, the interface closes.

change the line;

Thanks Chris

I don't think I did but I will check

Cheers
Bruce

Hi Chris

No I hadn't copied or altered QTdragon.ui. I have copied both it and the handler file to my config folder and all is good.

Thanks heaps

Bruce

Thanks! CLEAR ALARMS is working! Special thanks for chk_alpha_mode_checked!