QtDragon, Linuxcnc 2.9pre, and Debian 12 (bookworm)

Chris,
thanks for the reply.
No, the only custom file I have now, be sides my own .ui, is hal_glib.py
I know you're a darn good programmer, so I'm sure you could do a VM.
I'm a dumb ass mechanical, and even I use VMs.....

Rod,
I will try that.
thanks.

OK, ran the command.  Already installed........
 

Chris,
well, error on exit of qtdragon.
see the image attached.
more of nuisance than a problem, I think.

 

Looks like your screen code and qtdragon's has diverged... the line that errored is not in the latest code.

If I could run QtDesigner,maybe I could fix it.....

What is causing the error???

in the handler file: line 258 'self.probe.closing_cleanup__()
There is no such function in versa probe

I'm creating a VM right now in VMWare.
starting with debian 11.5 and doing a full upgrade.
then I'll install Linuxcnc. and hopefully it'll all work.
Then I can see what's going on.
I'll bring in my .ui file from the mill, and see if it opens in qtdesigner....
stay tuned....

Chris,
qtvcp_plugins.py  definitely has problems....
my new debian 12 VM with 2.9pre proves it.  see the images.
one image shows starting qtdesigner without the link to qtvcp_plugins.py.   designer works....
the other image show starting qtdesigner with the link to qtvcp_plugins.py.    designer fails, with that error of float to int
please fix this....
I can definitely help with testing..  let me know.
It needs to get resolved, sooner or later.   sooner far better than later.

Yes. Open qtvcp_plugins and comment out each line until you isolate the particular file. I would guess the files we already played with will be the problem.

It does load after changing line 12 in /lib/python/qtvcp/widgets/round_gauge.py from:
        self._threshold = 0.0
to:
        self._threshold = 0

I don't know what the repercussions are though...